Hi i have bought this objekt, the body I think is Hudson or Es***, but I realiced that the ch***i is from another car do anyone know? The engine mountingplate fits the frame <!-- / message --><!-- edit note -->
you might try asking on the hudson forum on www.cl***iccar.com . someone there will def know. looks like a bit of this and that to me. i am not sure what the sdan body is. if it's hudson or es*** someone will know there.
http://en.wikipedia.org/wiki/File:Es***_Super_Six_4-Door_Sedan_1930_2.jpg Check this out. And this one http://117.104.180.94/het/gallery3/index.php/Es***/Cruise-08-025-_Large_
where on earty is Karlshamn? This is just a question so don't get shook. Unless you are doing a restoration I would not be concerned about the ch***is, it is the body that you need to know about so you can find the pieces that go with it. Modify the ch***is to suit your build. It is not likely that you will be using any of the old driveline parts if you are building a hot rod or a custom anyway. Those old wheels are wall hanges by the way. They make excellent clocks.
Karlshamn is in south Sweden. I was thinking use the ch***i and build an old racecar like this ! and i have an old Pontiac flathead 8 to put in it. And the body will be a ratrod whit new ch***i.
they have some threads with those boattail speedster hudsons on cl***ic car aswell. i bet a hudson 6 would be pretty hard to come by in sweden so the pontiac 8 would be a pretty cool replacment. best of luck with both projects.
If that is an Es*** ch***is that is the one everyone used to build dirt cars in the 1930's. The rear kickup is perfect. The old car in the center is a Hudson team car from around 1919. Bob
Hello Molin, a little curious! Have you received any response as to which frame / ch***i you have in the pictures? Best regards / Ruban