Wheel on Willys

Ok guys, can some one tell me the make of this wheel.

They have ford bolt pattern

 

mid-80's spare of some kind.

Olds Toronado?

 

Ya I think yer right...not vintage just old?

 

hmmm, Ford pattern?

Lincoln spare?

 

I think ....... stock Willys (hole sawed)

 

should be four bolt?

 

My Willys truck was 5 lug, but the factory spare was a long lost memory by the time I got the truck.

 

Is that a big valve stem for a tube tire?

could be an old jeep wheel.

 

They look like willy's wheels that some one has use a hole saw on the center. Do you want to sell them?
Jimmy

 

I would agree with Wheelkid. If you look at the center of the wheel where the lug holes are you can see the flats where the hub cap clips should be.

 

I believe Mike Marinoff had front wheels like that on the front of his Willys G***er. Google images for his car.

 

Like I said

 

Could these be the same wheels. Mike Marinoff.

 

They are a stock Willys rim. They are a 4x16 and a 4.5x5 bolt pattern. I've had them before. They were used on a lot of the early coupes for racing because they were narrow. Some were even chromed like the ones in the above picture by the builders. They were made by Kelsey-Hayes. The ones I've had were stamped K-H on the back just like some Ford rims.

 

Good information on the wheels. That puts this post to bed. Thank you curbspeed.

 

Those are the ones I was thinking about, and yes Ollie Olsen had some too.

 

I have looked at as many Willys to fined these wheels. I can not fined a single photo of a early Willys with these wheels. I see that some of the early g***ers used them. What the hell are they??? Come on guys I need your input. I'm ready to rechrome them for an extra set of g***er wheels for this project.

 

Ollie Olsen's wheels.