Register now to get rid of these ads!

54 Maiden Voyage

Discussion in 'The Hokey Ass Message Board' started by Chopped50Ford, Jul 11, 2005.

  1. Chopped50Ford
    Joined: Feb 16, 2003
    Posts: 5,854

    Chopped50Ford
    Alliance Vendor

    We finally did it! 2xcrash and I.

    The 54 Plymouth made its maiden voyage today. Its been about 6 months of working on this thing every weekend. whew! A SBC 5.0 liter Pontiac Formula Firebird motor swap, 700r4 trans added, some paint/flake, custom sheetmetal...and lovin'!

    To share the fun, 53Burb, Low Springs and Nobu came out to visit, talk shop and turn a few wrenches too....Thanks guy for comming out! Oh, and next time...53Burb bring some rags to wear so you can get under the car too!! :D

    We threw in a milk crate...isnt that the way to do it for the first run? Fired up the car and backed into the street. 2xcrash took his ride for the first time to the fuel station down the street...stomped on the gas and rode it all the way out. Unfortunately, the radiator cap was not on tight and water spewed all over...but hey...if it was a perfect run...I would instantly think everthing was wrong. :)

    It was a great to see and very rewarding...here are some picts
     

    Attached Files:

  2. Chopped50Ford
    Joined: Feb 16, 2003
    Posts: 5,854

    Chopped50Ford
    Alliance Vendor

    more picts.
     

    Attached Files:

  3. [size=+3]AWSOME!!![/size]

    I can't wait till i reach that point, must be a good feeling, huh!!
     
  4. Chopped50Ford
    Joined: Feb 16, 2003
    Posts: 5,854

    Chopped50Ford
    Alliance Vendor

    I didnt think the motor would give much power, but damn, I took it out and was nearly thrown off the milk crate 3 times after whacking the throttle.

    It sounds mean (20" cherry bombs) and has the power to back it up. Now we have to fine tune the trans.
     
  5. zues
    Joined: Jun 30, 2005
    Posts: 187

    zues
    Member

    Any pics of the motor swap? Thanks
     
  6. Chopped50Ford
    Joined: Feb 16, 2003
    Posts: 5,854

    Chopped50Ford
    Alliance Vendor

    sure Ill post some tonight.
     
  7. low springs
    Joined: Jul 10, 2003
    Posts: 2,499

    low springs
    Member
    from Long Beach

    very cool...so what happend with the starter and did you find the ****** dipstick? :p

    heres a pic i took. very nice.
     

    Attached Files:

  8. 2xcrash
    Joined: Mar 25, 2004
    Posts: 363

    2xcrash
    Member

    Replaced the silnoid (sp) and the dip stick was found :D .

    This thing is a blast. when I got it on the street I went to the gas station to fill up. No front seat cause we're still working on the inside, sitting on a milk crate, give it some gas and about came off the box :eek: ... Once the little bugs get worked out this car is going to be a scream....
    Thanks to Chopped50ford for all the help, I've learned alot in the last few months and look forward to getting a few Hot Rods up and running in the next few months too :cool:
     
  9. FONZI
    Joined: Mar 5, 2001
    Posts: 1,536

    FONZI
    Member

    Looks like fun guys!


    FONZI
     
  10. 40StudeDude
    Joined: Sep 19, 2002
    Posts: 9,562

    40StudeDude
    Member

    Naaaaahhhh, I always use empty buckets, turned upside down...that way, when people ask, dumbfounded: "What'd you do for seats?" You can tell them: "Awww man, I just used some used "buckets!" They'll be impressed!

    R-
     
  11. hellride101
    Joined: Mar 12, 2005
    Posts: 13

    hellride101
    Member
    from valley

    hey I'm really interested in this thing, I'll talk to lee and nobu since they came out to see it ,and would like to come out and see it myself if you dont mind thanx stan
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.