51 chevy Door Glass Installation

Does the door gl*** go in before the division bar and vent window, or does it go in last? and do you put the bottom channel on the gl*** while it is out, or once its in?

Thanks!

 

Pretty sure the gl*** goes in last.

Check out the manual here for some step by step instructions:
http://chevy.tocmp.com/1949_53shop/01body/1_04.HTM


I would put the bottom channel on the gl*** first, will probably be easier that way.

 

Put the bottom channel on the gl*** first, then put the window in the door and hook up the window to the track system , then install the division bar and wing gl*** last.

 

Have you figured out the install? I'm having the same issue

 

I just did my driver door gl*** on my coupe. I dropped the gl*** into the bottom chanel first. Make sure to use adhesive or the gl*** might come out of lower channel after you put it all back together, happend to me.

Then put in your division bar/wing window in and adjust the lower channel adjustment screw to make sure it cycles up and down smooth without binding up.

I don't think you can get gl*** out or in with the division bar still in place.

Also left the gl*** holder on it's track because I installed new s****ers and it would p*** thru with it attached to gl***. Helps if you have another person to ***ist you.