model A side glass?

I'm gearing up to put glass in a 1929 model A 2 door. what is the width of the door and 1/4 glass?

 

Chubbie, i don't know what your asking?

 

Dont you own a tape measure???

 

Just call any of the vintage glass vendors and order the glass. They have templates for all of the old cars. I'm sure there is one listed in the index on this site.

 

26 3/8---------30 3/8 should work.

 

thanks for the non "smart ass" answer.( from the guys that have never done it.) its tough to get the window right with new felts, and how tight to get them

 

When I did mine the 2 sides were slightly different...just something to keep in mind.

 

Not a smart ass answer..just trust my own measuring..like you should do
you note that one answer here says his measure different from side to side?

 

Mine ended up with a slight taper so measure top bottom and middle, also the glass guy can grind narrower if it is to tight error on the tight side.

 

Don't know if this is any help but when I got round to getting the glass cut for my Model A Pickup I made templates out of plywood first. Fitted it just like the glass with all felts in place then checked it would roll up and down freely. Worked great.

 

This is the answer. You can use luan board too.

 

I too made luan templates. Glass was cut to same size and very close to same thickness. Worked great with the new felt

 

..... exactly, no matter how experienced and well meaning a person on the internet may(or may not) be, so long as you understand what you are trying to do, figuring things out yourself isn't a bad thing.

 

card board works also as a template. templates are the only way to get it perfect.

 

order it from Chris Blatty here on the HAMB

 

Order it from Chris blattie here on the hamb
He will ship a full set for just over 300
Best deal intown