model A side glass?

I'm gearing up to put gl*** in a 1929 model A 2 door. what is the width of the door and 1/4 gl***?

 

Chubbie, i don't know what your asking?

 

Dont you own a tape measure???

 

Just call any of the vintage gl*** vendors and order the gl***. They have templates for all of the old cars. I'm sure there is one listed in the index on this site.

 

26 3/8---------30 3/8 should work.

 

thanks for the non "smart ***" answer.( from the guys that have never done it.) its tough to get the window right with new felts, and how tight to get them

 

When I did mine the 2 sides were slightly different...just something to keep in mind.

 

Not a smart *** answer..just trust my own measuring..like you should do
you note that one answer here says his measure different from side to side?

 

Mine ended up with a slight taper so measure top bottom and middle, also the gl*** guy can grind narrower if it is to tight error on the tight side.

 

Don't know if this is any help but when I got round to getting the gl*** cut for my Model A Pickup I made templates out of plywood first. Fitted it just like the gl*** with all felts in place then checked it would roll up and down freely. Worked great.

 

This is the answer. You can use luan board too.

 

I too made luan templates. Gl*** was cut to same size and very close to same thickness. Worked great with the new felt

 

..... exactly, no matter how experienced and well meaning a person on the internet may(or may not) be, so long as you understand what you are trying to do, figuring things out yourself isn't a bad thing.

 

card board works also as a template. templates are the only way to get it perfect.

 

order it from Chris Blatty here on the HAMB

 

Order it from Chris blattie here on the hamb
He will ship a full set for just over 300
Best deal intown