1932 Ford 2dr. Sedan Window Heights?

To all,

I am looking for stock window heights (6), for a 32' two door sedan.
If anyone has an original sedan or any technical sheets on the matter
that would be greatly appreciated.

Thanks!

 

If you mean the height of the openings, the doors and quarters are 13-5/8" and the rear is 9" in approx the middle of the windows. If you mean the actual glass I do not know. Mine are installed, too hard to get a measurement.

 

luxobarge-

Thanks alot, that wil definately speed things up,
would you happen to know the front as well?

 

I have a stock height 32 sedan.draw me a picture of exactly what you want. cobramanab@flash.net e-mail deucemanab

 

sketch of the dimensions we need.Any help greatly appreciated.

 

anyone?

 

I have the windshield frame here in the house and it measures 12 1/2" in the center outside edge to outside edge. HRP

 

thank you!

 

Input?

 

My Tudor isn't at my house right now, it's at my parent's place. I am going there tomorrow. If you still need the measurements, I can get them then. Let me know if you still need them.

 

Yes sir ^

 

What is the "C" measurement in the diagram attached to post #5?

 

unsure how accurate these measurements need to be, but bear in mind that they may vary slightly from car to car depending on where they were built, and if the windsreen (windsheild- to some) is a reproduction one the variance could be substantial -(from experience- over an inch)

 

So today I had a chance to see my Tudor sedan. I took the measurements you requested, with the exception of C since I didn't understand what C was. They are as follows:
A: 13.5"
B: 13 7/8"
D: 9 1/8"
These were measured in the middle of the window from top to bottom, not taking into account any window rubber or felt etc. Hope this helps.

 

Thanks Duecedreamer, I believe C was the front

much appreciated