Hey guys I'm in the process of building my 29 a coupe with a 330 desoto hemi and was going with a 6-71 until things took a different direction and ended up with a nice vs57 unit that i sent to Mr erb . So here's where I'm at i need pics of vs57's set up on v8's , mounting plates and drive systems since I'll have to fabricate this stuff and help would be Appreciated .......
It's in the works .... i'm building the same piece as rat bastad with a Mcculloch and a different cam profile . here is some quick mock up with my spare motor . i'm waiting to get my Mcculloch back from John erb so i could start with fab on the mounting plate
I'd like to hear more about these setups I'm gathering parts and info to put one on an early Olds got a bracket and tension arm for the Olds had a crank hub made got most of the bits and pieces to modify an AFB for blow through a pressure actuated fuel filter/regulator and ordered an air/fuel gauge still need to gather up a few more bits but mostly want to hear from guys that are running these
If you want to stay here then take the time to understand how things work around here and where they work. No selling on the main board - selling in the cl***ifieds only...... I get it that a price became part of the conversation, but at that point - it belonged - goes in the cl***ifieds. If you don't like it based your your last post - then up to you if you want to stay. Take some time and figure out how it works around here......
here's an older picture of my Olds setup, and early mock-up on the roadster. (roadster has a Cragar 4x2 on it now)
The Jalopy Journal
