Register now to get rid of these ads!

Is a 1956 c-600 windshield the same as a f-100 or anything else?

Discussion in 'The Hokey Ass Message Board' started by Filardi Fabrication, Feb 21, 2013.

  1. Filardi Fabrication
    Joined: Feb 16, 2013
    Posts: 4

    Filardi Fabrication
    Member

    I'm interested in a 56 Ford COE that needs a windshield. The chances of finding another windshield from another COE is probably next to impossible, and I've seen in a cl***ified ad for a 55 COE that had damaged doors and roof that the person was selling a f-100 cab with it to use tops of doors and roof from it. Will that work for a 56?

    Thanks
     
  2. Hnstray
    Joined: Aug 23, 2009
    Posts: 12,356

    Hnstray
    Member
    from Quincy, IL

    The '53 thru '55 F series trucks share the same cab design which used a simple curved gl*** with slanted w/s pillars. For '56 models several changes were made to the basic configuration which was most noticeable in the windshield shape. The '56 used a "wrap around" w/s design and the upper door frame was very different.

    So, if I understand your question correctly, no the '55 parts will not work on your '56, unless you grafted the upper cowl/roof to your cab and used the '55 doors as well. That would be an extremely labor intensive way to get a new windshield.

    To the best of my knowledge, the windshield in your '56 COE is the same as any other '56 F series cab and should be available, though '56 is a one year only item.


    Ray
     
  3. Filardi Fabrication
    Joined: Feb 16, 2013
    Posts: 4

    Filardi Fabrication
    Member

    Thanks Ray. After reading my post, it does look like I was asking if a 55 would work, but it obviously wouldn't. I was just referencing that I've seen someone suggest that a 55 c-series and f-series windshields and roofs were the same and wondering if the same goes for a 56.

    Thanks again. Getting a little excited now!!
     
  4. Vimtage Iron
    Joined: Feb 28, 2010
    Posts: 561

    Vimtage Iron
    Member

    I'm working on a C 600 now,as posted above its a one year only truck, but most of the pickup parts fit, doors also of you want to cut the fender curve into them and move the hinge, I've got a 56/57 parts book that covers the 100 to 600 models it helps for cross reference.
     
  5. Filardi Fabrication
    Joined: Feb 16, 2013
    Posts: 4

    Filardi Fabrication
    Member

    ^^^^^^^ good to hear. I will be looking at it on Sunday. We're can I find that parts catalog?
    Thanks.
     
  6. Snakeoyl Joe
    Joined: Mar 9, 2007
    Posts: 105

    Snakeoyl Joe
    Member

    Might want to check with the F100 group.
     
  7. Vimtage Iron
    Joined: Feb 28, 2010
    Posts: 561

    Vimtage Iron
    Member

    I got mine on ebay, there was another one of the same there also, I believe it was blue and white covering 56/57 model years from 100's to 600's, also panels and parcels.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.