Customs No turning back now!

This is what's left of my 46 M series p/u. I sure hope I know what I'm doing

 

I happen to know for a fact that you know what you are doing...

Cant wait to see what you are going to do with this one.

 

what are you doing ?

 

4" section

 

looks like fun.

 

You blasted it before welding? Nice clean sheetmetal? Maybe you do know what you are doing, time will tell. Bob

 

Always bare metal! Can't come into my shop unless the're nakid! Actually I was just out in the shop figuring out how I'm going to tarp off an area to blast it while it's apart. I have to blast and epoxy the inside of the quarters and wheel houses on the T bird I'm working on, so might as well do both at once.

 

Subscribed ! Are you building a hot rod or a custom?


Posted from the TJJ App for iPhone & iPad

 

Going from hot rod to custom.

 

I always loved those trucks and wondered what they would look like Sectioned a little, thats the only prorpotion that looks off on them, they seem a little tall..

 

Cool! What are your [lans for other body mods?

 

I can't wait to see it.

 

Spent a little more time on my stude this weekend. Hung the front sheet metal back on the lower half with some other aprons/headlights I had. The first pic is a photo shop that chrisbcritter did. The second is the front end loosely setting together with the top grille bar removed. What do you think? I'm favoring the 3 bar grille myself.

 

that fresh from the 'blaster metal will rust in a minute, at least up here in the Northwest, get some primer on it quick or it will grow a red beard

 

The aprons have been hanging in the shop for years. The cab has a very light coat of 1791. But most of it will get blasted at least one more time. The weld areas again when the metal work is finished.