Did a search, but didn't find anything more than donor units...... Where's a guy in need to go for Holley 94 replacement parts? Prefer HAMBers, but any GOOD source leads are welcomed! EDIT: It might help to let you know what I'm working on.....I'm building two matched 94s for my A-banger in my 31 Tudor. I have a Burns 2x2 intake that I'm cleaning up, and I'm building a split header ('cause I'm too cheap to buy one)! The otherwise stock banger will also be equipped with a Mallory dual-point and a fresh coat of paint!
Lots of those on Ebay cheap! I have a good complete unit & kit for backup, but prefer Stromberg 97, and they are NOT cheap.
Check with Ken-ct on the Fordbarn, he hangs out on the early V-8 section. Hands down one of the best flathead carb guys around. Rod
Lots of the cheap parts being sold on ebay and elsewhere are currently produced off-shore. Some of them will work. Jon.
Charlie price's vintage speed...Google it you will find his site.. great guy he will answer any questions u have... Sent from my DROID device using the TJJ mobile app
I thought 2 of those 94s was to much for the old Model A engine. Would,nt 81s be better . Or even Ford 92s ? Then again 81s & 92s are expensive, right ?
****ster can help you with about everything you need, also. He's great to deal with and knows his stuff. And he's a HAMB vendor.
Mike, I was looking for input on where others got their parts. Just because someone sells 94 parts doesn't mean they're quality parts, or that their service is good! Sent from my DROID device using the TJJ mobile app
Gaz, yes 81s would probably be better, but I've been informed that they will work well if they are set up properly. 3.5 power valves and 53 jets give a proven setup, according to Nailhead Jeff. I'm willing to give it a try, especially since I have 18 94s to work with! Sent from my DROID device using the TJJ mobile app
What specific parts are you looking for???????????????????????????? I have some bodies, but no early bases. What model or year 94? I am working on matching 59's and "no model" carbs (3 each) The outside linkages are all available on evil-bay (money ****ers). I just bought 4 parts carbs for $40.00 from there. Most of hte inside parts I buy from Charlies in Vero Beach, Fl
53 Sounds big. 51's are stock and a good place to start. PV's I would start with 7.5's and go from there. Just an opinion.
I'm taking inventory of what I have from dis***embling 5 carbs. I'm cleaning everything right now. From there, I'll know what I need. I'm just going on what Nailhead Jeff had experience with. His suggestion was the first I received, so that's where I started. Sent from my DROID device using the TJJ mobile app
The Jalopy Journal
