Need some advise on paint removal

Evening all, Can anyone give any suggestions on how to remove the paint form the cowl tag pictured below. I don't want to damage stampings or the aluminum. Thanks for all your help.

 

Baking soda blast it or stripper


Posted from the TJJ App for iPhone & iPad

 

Regular old paint stripper, it won't hurt aluminum. Tape carefully around the edges of the tag if you want to save the body paint.

 

brake clean and a rag or spray carb clean and a rag

 

I agree with LHT, brake clean and a clean rag. I just did that on my valve covers that I didnt want to hurt or media blast and worked like a charm. Q-tips can probably help get between the letters better.

 

Thank you all, I will post a after picture soon.

 

Aircraft stripper is the **** for aluminum.

 

Lacquer thinner. Keep it wet. BAM.

 

Methyl Ethyl Ketone (M.E.K.) solvent will get the job done too. Just don't snort too much of it...

 

All clean, thanks for all the help. Brake clean, couple rags and some Q-tips

 

If you can buy it??

Methylene Chloride will wipe the smile off "Mr. Clean's" face.

Best stripper that I know of that is in a can. And I'm talking about the BEST!!

pdq67

 

You can very much buy it. I buy it by 55 gallon drums. Expensive though.