32 frame guys ~~~~~ some help please

Do I have these holes IDed correctly? And can you confirm holes 1 - 5

Im going to use the dimensions below to put this together so I need to know I have the holes right

My plan is to go from a center line to the body holes to get the rails the correct distance from each other








<DIR><DIR>1932 FORD FRAME RAILS ARE 12' 6" LONG.
1932 FORD FRAME RAILS ARE 6" TALL THROUGH THE BODY AREA.
1932 FORD FRAME RAILS ARE 2" WIDE FROM FRONT XMEMBER TO REAR XMEMBER.
1932 FORD FRAME RAILS ARE 4" TALL AT THE REAR AXLE CENTER LINE.
1932 FORD FRAME RAILS ARE 2 5/8" TALL AT THE FRONT AXLE CENTER LINE.
1932 FORD FRAMES SHOULD BE 23 3/4" WIDE AT THE FRONT.
1932 FORD FRAMES SHOULD BE 40" WIDE AT THE REAR.
1932 FORD FRAMES SHOULD BE 25 5/8" WIDE AT THE FRONT AXLE CENTERLINE.
1932 FORD FRAMES SHOULD BE 40 3/4" WIDE AT THE REAR AXLE CENTERLINE.
1932 FORD FRAMES SHOULD BE THE SAME WIDTH AT BOTH THE TOP AND BOTTOM OF FRAME RAIL.
1932 FORD FRAMES SHOULD BE 40" AT THE REAR MOST BODY HOLE.
1932 FORD FRAMES SHOULD BE 43" AT THE NEXT BODY HOLE FORWARD.
1932 FORD FRAMES SHOULD BE 43 1/2" AT THE NEXT BODY HOLE FORWARD.
1932 FORD FRAMES SHOULD BE 43 1/4" AT THE NEXT BODY HOLE FORWARD.
1932 FORD FRAMES SHOULD BE 40 1/8" AT THE NEXT BODY HOLE FORWARD.

 

I think it's Kiwi Connection that sells a really good large poster format ch***is diagram. Worth the price.

 

Id like to do it this weekend / not wait



thanks

 

Google Wescotts auto restyling, click on TECH it will take you to their frame dimension chart and will give you a pdf file of a 32 frame with all the dimensions. You can print it out and your all set. Hope this helps, G.....

 

1 and 3 are for the firewall. 2 is for the cowl band. Pretty sure 4 and 5 are for the A pillar and the front end of the subframe.

 

Thanks
Got it

 

Greg - we did exactly as you talking about doing when we built my frame. We referenced Wescott's drawing to tack it together before sitting the body on to confirm everything lined up.

http://www.wescottsauto.com/WebCatalog/Tech/FrameDiagram1932.pdf

 

For now
I just wanted to space them apart correct dimensionally - square it diagonally so I could ****e the rears back on ………….. If that makes sense.