F1 Clutch Equalizer Shaft Ball to '32 frame

I'm building a '30 Model a Coupe with a '32 frame and F1 pedal ***embly to a '39 3 speed ******.

I have the F1 cross member welded on to my '32 aftermarket frame.

My question is: Whats the best way to mount the Clutch Equalizer Shaft Ball onto the frame?

The frame is boxed.

Thanks!

 

Bump

 

http://www.vanpeltsales.com/FH_web/FH_images/Trans parts pics/01A-7507clutchequal-brckt.jpg

http://www.vanpeltsales.com/FH_web/FH_images/Trans parts pics/01Y-7507clutchbracket.jpg

Both of these are normally bolted to the frame rail. You could weld it I suppose but you'd make it difficult to replace on down the road. We stock both types.

 

I'd weld nuts into the frame or if you like to spend money you can buy Nut-serts so that it can be bolted on.

 

Thanks everybody

 

mine needed to be spaced down like 3/8 of an inche so i just made a mounting plate for the it tapped it and welded it to the bottom of the frame.

jeff