hey guys. i just got a 39 ford pedal ***embly to put into my 37 ford pickup beacuse im switching over to hydrolics. i was wondering if they make dual master cylinders that fit the three-bolt bolt-patern of the pedal ***embly. i have only been able to find single master cylinders for it.
I'm not sure about a 3 bolt dual unit,....But there are adapters to mate a "Corvette" style dual m/cyl to that pedal unit. be sure to get the one with a 2" deep pushrod "pocklet". I have one in my 40, and it clears everything with no issues. 4TTRUK
Will probably have to make or purchase a three bolt bracket to two boit master cylinder adapter. The adapters are available at Speedway, Yogi's, Parr, P&J, etc.
Do you know which vette style master cylinder has that 2" pocket? Or which one does not? Posted using the Full Custom H.A.M.B. App!
Maybe on some, but not on many/most '60s-'80s Ford masters. Their power brake masters have the deeper push rod counter bores.
Ps; With that manual type Corvette style m/cyl, you'll need a longer pushrod, easy to make and fit as needed. 4TTRUK
http://www.parrautomotive.com/index...tegory_id=-1/home_id=-1/mode=prod/prd1214.htm http://www.yogisinc.com/index.cfm/p...tegory_id=-1/home_id=-1/mode=prod/prd3460.htm I checked online catalogs for Speedway, Yogi's, Parr, P&J, and ch***is engineering. I only found these two.
The Jalopy Journal
