Y block timing?

what should we run for total advance and what rpm all in this is a 312 y block with a lathem blower not a lot of boost. just crusing marloy dist . no vac. advance.

 

seems like it should be about 8-10 initial. what cam are you running?

 

I need to find what y block people use for total and when all in rpm.

 

You might try www.yblocksforever.com. Lots of good info there.

 

32 to 34* total on todays gas

 

All in at 2200, 36 degrees. Under pressure? Check with Bubba, or McTim here.

 

so not any different than sbc. I wondered since flatheads are so different if y blocks wold be?