1965 Studebaker Daytona Master Cylinder HELP!

trying to find a master cylinder for my car, to put it simply I just cant find one.

power 4 wheel drum

looks strikingly similar to a 67 mustang, put the bolt pattern is way off.

searched around the interwebs and read a lot about 76 gremlin, pushrod hole is far to deep, outlets wrong side and line connections are wrong.

any Studebaker fans have a number written down?

 

Contact Studebaker International in Indiana. Phone number is (317) 462-3124

 

You're way off in the wrong forum. Go over to the Studebaker Driver's Club. Someone there will have the P/N in a flash. http://forum.studebakerdriversclub.com/forumdisplay.php?8-Tech-Talk

jack vines

 

Raybestos # should be MC- 35237 others like it - 36141,36175 and 36455 all with mc prefix -....Rambler's had the same set up as well.... NAPA is a good source as well....

 

oh....and NAPA was where I went for my last 64 Daytona MC......still on it after about 5 years....

 

65 Stude isn't much different from a '64 and that's okay here.

Sometimes the HAMB is the best place to find an answer.