Register now to get rid of these ads!

Deleted thread

Discussion in 'Questions & Suggestions' started by 5CHERO8, Sep 14, 2013.

  1. 5CHERO8
    Joined: Feb 22, 2013
    Posts: 71

    5CHERO8
    Member

    I posted a thread requesting information about what might have gone wrong with my newly installed Hurst Compe***ion Plus shifter but it got deleted. WHY???? I tried responding to the PM that HAMB sent, but HAMB does not accept PMs. Catch 22???
     
  2. 117harv
    Joined: Nov 12, 2009
    Posts: 6,586

    117harv
    Member

    PM a moderator, they will explain.
     
  3. F&J
    Joined: Apr 5, 2007
    Posts: 13,291

    F&J
    Member

  4. 5CHERO8
    Joined: Feb 22, 2013
    Posts: 71

    5CHERO8
    Member

    PM a moderator...who might that be?
     
  5. X2 for F&Js suggestion. Take it to the question forum.
     
  6. 5CHERO8
    Joined: Feb 22, 2013
    Posts: 71

    5CHERO8
    Member

    Terse answers are not helpful.
     
  7. 63comet
    Joined: Jan 31, 2006
    Posts: 508

    63comet
    Member

    I was also told to pm a mod but can't figure out how to find a mod via the mobile app.



    Posted using the Full Custom H.A.M.B. App!
     
  8. 5window
    Joined: Jan 29, 2005
    Posts: 9,977

    5window
    Member

    Seems to be some very quixotic deletions lately-it's their ballgame, fine, but I wish there was more consistency. Hopefully you will get an answer.
     
  9. Don's Hot Rods
    Joined: Oct 7, 2005
    Posts: 8,319

    Don's Hot Rods
    Member
    from florida

    I don't get some of the deletions either. This one that the OP is talking about could not be more traditional than a Hurst shifter IMO, and two threads about a car trailer got deleted. How do they think traditional drag cars get to the Billetproof and HAMB drags ?

    Yet, some stay that are obviously not in accordance with the new HAMB rules. :confused: Like you, I would just like some consistency and maybe an explanation or two so we know the next time. It seems like the mods pull the trigger sometimes just to err on the side of safety.

    Don
     
  10. slammed
    Joined: Jun 10, 2004
    Posts: 8,150

    slammed
    Member

    Ryan. Kevin. General Gow.
     
  11. so Here ya go.... lol , if you go back to the main discussion board and scroll allllll the way down to the bottom of the page , the blue names under "moderators" and click on one of them. you can P.M. a Mod.
     
  12. 63comet
    Joined: Jan 31, 2006
    Posts: 508

    63comet
    Member

    I'd just be happy if I got a clear reason why in the notification email.


    This last one I had deleted on me gave no reason, not even the broad "Off Topic".



    Posted using the Full Custom H.A.M.B. App!
     
  13. slammed
    Joined: Jun 10, 2004
    Posts: 8,150

    slammed
    Member

    No one 'owes' you anything. The joint is technically free. Did you try the three names of mods I gave you? And do remember it is Saturday night.
     
  14. go-twichy
    Joined: Jul 22, 2010
    Posts: 1,648

    go-twichy
    BANNED

    wanting an acceptable answer is a normal expectation. if nothing else, it's common courtesy. or it used to be. the other thing, it may be free of cost, but it's not free of rules. i'de better be quite now or i'll get a " you're free to move on" pm. I like it here to, but it's the like minded members.
     
  15. 63comet
    Joined: Jan 31, 2006
    Posts: 508

    63comet
    Member

    Which one do I message? I don't know which one pushed the ****on.

    No they don't owe me anything.

    If I am not informed as to what I've done wrong I am bound to keep repeating the same action over and over again.
     
  16. tubman
    Joined: May 16, 2007
    Posts: 8,212

    tubman
    ALLIANCE MEMBER

    I find the new format very "busy" and quite irritating. I don't enjoy the H.A.M.B. as much as I used to. I wish the Ford V8 forum had more activity; I'd probably hang around there more. Also, I agree with everything Don says. I cannot believe the trailer brake thread was inappropriate in any way. I baffles me why it was deleted not once but twice. Everyone should know you don't screw around with success.
     
  17. 117harv
    Joined: Nov 12, 2009
    Posts: 6,586

    117harv
    Member

  18. There is no need to know.
    Any of them would have an answer in a perfect world. :rolleyes:
     
  19. Fact is, it's a traditional message board and if your not traditional they couldn't care less if you're on here or not. I've learned a lot of things here and got banged around now and then, but to me, it's worth it and it's their thing. I was there and if ya didn't have 2 nickels to rub together you threw anything you could find on you ride to keep it on the road and lots of stuff wasn't used enough to be "traditional". Not all of the country had the same advantages that the left coast had. In a word, it's a great message board and worth the "pain in the ***".
     
  20. 296 V8
    Joined: Sep 17, 2003
    Posts: 4,666

    296 V8
    BANNED
    from Nor~Cal

    A helpful hint that worked for me

    I use to get irritated - complain and probably nearly banned

    Then one day a few years ago I asked myself
    Why am I doing this ?
    Would I like it if someone was telling me how to run my business?

    I realized
    Things have always worked out and gotten better here over time for the most part … so let them do their thing

    Then I went outside and built something ... for me my way :D
     
  21. 5window
    Joined: Jan 29, 2005
    Posts: 9,977

    5window
    Member

    Yet, somehow it's not. It does seem a lot more cluttered and busy and I don't really want to spend the time looking at each board to find threads I want to join.

    Deleting one of my posts and sending me an PM note that it's Drama is fine-I knew it was when I posted it. But, closing/deleting threads that appear to be really relevant and on topic with no explanation only perpetuates the problem -if you don't know the mistake, how do you avoid it?
     
  22. blowby
    Joined: Dec 27, 2012
    Posts: 8,664

    blowby
    Member
    from Nicasio Ca

    The threads I have had deleted, on reflection, were self explanatory.

    I do miss the rattle can marble one though. :)
     
  23. Ryan
    Joined: Jan 2, 1995
    Posts: 22,819

    Ryan
    ADMINISTRATOR
    Staff Member

  24. 53 COE
    Joined: Oct 8, 2011
    Posts: 688

    53 COE
    Member
    from PNW

    What - the rattle can marble one is gone - that was educational....

    :)
     
  25. Willy_P
    Joined: Mar 19, 2011
    Posts: 762

    Willy_P
    Member

  26. blowby
    Joined: Dec 27, 2012
    Posts: 8,664

    blowby
    Member
    from Nicasio Ca

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.