How to Lower my 65' Ford F100?

I want to lower my 1965 Ford F100 (twin I Beams). Any suggestions?

 

djm beams, the only way.

 

Yeah, drop beams. Only other option is to yank the whole front end and replace it with something else.

 

I saw this build and it made me want one.


http://www.jalopyjournal.com/forum/showthread.php?t=722497&highlight=f100

 

Thanks for the responses. Just as I suspected, either drop I beams or sub-frame it. Thanks

 

crown vic clip bolts in!

 

The crown Vic is the way to go its alittle more then a bolt in. theres some links on you tube try 1969 f-100 swap

 

You could also just go under your truck with a torch and just cherry red the axel close to the wheel. You will see the truck start to drop. But don't go to far. slow and easy. also helps if you put wood blocks under the frame so it cant go to far.

 

I hope your kidding

 

Obviously,you don't know anything about twin I beams!

I hope the OP doesn't try this. HRP

 

Don't worry, I'm not dumb enough to use the torch "trick".

Sent from my SCH-I535 using H.A.M.B. mobile app

 

lol