need special rear brake tee

I need a brake tee with a 7/16-20 female inverted flare in and two 7/16-24 female inverted flare out to repair a customers early chevy pickup. Didn't look like Dorman had one though my Dorman source wasn't all that enthused to help. Like the picture only with 7/16-24 on the two "out" ports instead of the 3/8 shown.

 

Speedway 910-31849 good book to use for reference

 

Try your local Ace Hardware my tee stripped and found just what I needed there,also got all the fittings I needed to do the dual master cyl swap.

 

Try the local hose maker.

 

Edelman, Weatherhead and Everco do not list that combo in my book.

 

Give these guys a call and see if they have it. If they do I will pick it up and ship to you. They are about 1/2 mile from my office.

http://www.rbisj.com/
Royal Br***
1700 Martin Avenue
Santa Clara, CA 95050
(408) 727-4327

 

Thanks to everyone for the help - the problem was that the customer bought some pre-formed lines from LMC and they had the 7/16-24 nuts on the tee end- it was 3/16 line and I had just enough straight tubing left on the end after I cut the flare off with a razor saw to redo the flare with the 3/8-24 nut and re-use the tee I had. Ridgid double flare tool to the rescue (again)