T5 small parts question

I bought a mechanical tailshaft housing for my T5 and it came with a small bag containing the parts in the photo. I realize the bearing needs to be replaced, but is the white plastic piece the oil flinger? I've seen some where it looked like a plastic tube cut on a diagonal, but know there are different styles. Thanks in advance for whatever you can share. Dave

 

yep. Ford calls it an oil funnel. You may be able to Google an exploded view to see it

 

There is a T-5 information group at www.inliners.org and you'd be amazed at the numbers of variants and ratio's too.
Normbc9

 

I dont remember running into that on either the s10 or camaro ****** when i swapped housings

 

When looking at the back of the ****** before installing the tail housing, it's in the lower right corner, right in the middle of the slider gear.

 

BUMP

I have a 1352-176 WC trans with the "plastic tube cut on a diagonal", as well as a NWC S10 mechanical tailhousing with the same parts as pictured above. Now, I have read all the T5 threads on here and I know I must use the flinger that came with the S10 tailhousing. My question is: do I remove the diagonally cut flinger in the WC trans and slide in the S10 flinger? I tried this and it seemed sloppy.