EZ Wire Loose Wire

I'm wiring on my 49 ford with an EZ Wire harness and have discovered that the purple "IGN Switch Start" wire that goes to the solenoid is laying cut loose in the box I need some help. It looks like it should come from the fuse block, but I'm new to this and not sure. I have gone through the harness and cannot find the start point of the wire, and it looks like the fuse block is fully terminated. All the diagrams show the wire coming from the fuse block.

 

That wire goes from the starter solenoid, to the neutral safety switch (if an automatic) then to the Ignition switch 'Start' terminal. If it's a stick, straight from the solenoid to the ign switch.

 

Thanks Hotroddon. The harness I have is used. All those wires can be intimidating. Thanks again man.


Posted using the Full Custom H.A.M.B. App!

 

call them they will answer your questions . i wouldnt tell them it was used though .

 

I've heard that they are good people. I think I have it figured out. I'm not finished tough so I'm sure I will have to call them.


Posted using the Full Custom H.A.M.B. App!