Technical 1934 Ford Pedals to 1963 Borg Warner T10 Tranny

Guys,
I will be bolting up a a 63 Dodge T10 to a 53 Red Ram Hemi onto my 34 chopped Tudor, I would like to run traditional 33-40 pedals, and would like to get some insight if any one of you have done this, and see any possible pictures ideas... Thanks pics can be sent to lvaladez@kprsinc.com

 

It would help to see some pics of your build. There is a big difference between a 33 and 40 set of pedals to start with, so we need to know if you are using a frame with stock x-member etc. Sounds like a great project!

 

Yeah stock frame with stock cross member.

 

I don't have any photos at the moment but I used stock pedals with a DNE 5 speed and Lakewood housing. I had to modify the pedal with a clutch arm but it worked fine. I will see if I can locate a photo.

 

Thanks guys running a SB Dodge Bell housing LA motor type, with 241 Red Ram. Also is there an adapter that can pick up the Dodge 63 T10 to bolt up to the housing, right now the T10 hits all three bolts except for the one on the RH bottom corner it lands in the valley of the housing. Any info is greatly appreciated, thanks

 

Here is the a picture of the Borg Warner T10, so any and all info on this would be great thanks guys!!!!

 

btt

 

bttt

 

btttt

 

This thread has some ideas including mine in post no. 26.
http://www.jalopyjournal.com/forum/showthread.php?t=449660

 

Thanks Bill M, it sure did. I now have to options to really like the cable set up by Druss on his Vicky.

 

this help at all