Need photos of early CAD motors decked out-

I need some photos for reffrence to work from of early cad motors, I have a good one w/six twos- any other pics would be great-

anyone have a pic of a blown 331?

Tuck

 

No pics But damn I could stare at yours all day good job

 

i think that pic is marcus's motor- not a pic of mine

i have a 59 390 with a cragar 4 carb- just looking for more engine shots.

 

This I got off the HAMB, whose it is I don't know....

 

heres one ...just over look the cheesy scoop......as it was a later addition ....same owner since 55.....the owner has it buried in the back of his ba*****t.....brandon

 

the blu eone with dual 4s is marcus the one tuck posted is caddilackids

 

try agian ....like last time....

 

Lookie.

 

Little something like this perhaps. Got some more at home.

 

heres mine

 

Caddy's are my fetish.

Mine:


Outlaw


Unsure of the owner


Jivebombers

 

jonnycola-do you have straight or progressive linkage on that mill? Do you have any pics of how you connected both sides and hooked all that linkage onto a throttle? (I'm still havin' a little trouble with our 6x2 setup)
-Dean

 

I thought it was big hairy men =Bear. In Chaps.

 

Lets see them, wife got a new digital and am going to shoot some new pics of ours and see if we can get them too load.
Later, Dave

 

That too...

Caddies are the new nailheads...

Mine has straight linkage with a cable pedal. The linkage is from vintage speed, and I used an offenhauser pedal.

 

How about a nautical Caddy? Then there is always Ohio George Montgomery in 1961 or so. His was about the ultimate Caaddy motor back then. And I am kind of partial to the last one.

 

Holy **** do you have the other Hildebrandt valve cover to go with that? Saw a few pair on ePay a while back and they sold for more than I paid for my car!
-Dean

 

Wasn't Grabowski's "T" powered by Caddy ?

 

Where do you get a adaptor to go from caddy to gm manual ******??? I know all them caddy mills wer not backed by automatics

 

wilcap or benstons transadapters

 

Who's the funny looking guy with norm?

 

I dunno,

I have a cragar adapter that allows me to bolt my cad motor right into my shoebox useing the original shoebox manual or a heavy later galaxie trans which I'm gonna run-

cool pics... EVEL nailheads? hahahaha

heres a scribble

 

I love it! Although I got to bust your chops on the FOUR zoomie pipes. Siamesed center port, unless that is the new supersecret prototype disguise for a SBC just like the Olds Rocket valve covers.

 

if I made zoomies on a cad I would have four pipes-
the center two are twin and tight check the overlay- haha

Tuck

 

he wants to disguise the cad as a chevy in disguise with the four pipes and cad covers

 

I am pickin' up what you are putting down! Kinda got a double barrell shotgun look to it....You are on to something, new meanig for the term "shotgun pipes."

 

hahaha

here 3 pipes so its DE-OLDSMOBILED wanabe cad-

 

Man, I just listed a 4x2's Cragar Caddy intake and carbs on ebay, I've had it for two months before I knew what it fit! It nearly drove me crazy looking for old pics of engines.. and now I see one like it, cept mine has cool fuel lines and different accel linakge, but its not chrome. Those old caddy engines would be fun to run.

 

Ya...what he said.

Here's some more pics of mine in the car.