Register now to get rid of these ads!

Let's Talk Cyclecars

Discussion in 'The Hokey Ass Message Board' started by Bigcheese327, Dec 4, 2007.

  1. SR100
    Joined: Nov 26, 2013
    Posts: 1,182

    SR100
    Member

    [​IMG]

    Is the chain drive used to facilitate independent suspension under the rules requiring A7 chassis/drivetrain? or is there some other reason?
     
  2. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

    Probably about like a model A. I can't imagine the tall, narrow 7 handled very well but as a special they must have been much better.
     
  3. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,432

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    It's a good way to reduce unsprung weight.
     
  4. Stretchmobile
    Joined: Oct 29, 2013
    Posts: 108

    Stretchmobile
    Member
    from So Cal

    I love the mechanical tach on the steering column.
     
  5. UKAde
    Joined: Nov 13, 2002
    Posts: 502

    UKAde
    Member
    from Oxford UK

    I think also the ability to change the gearing would be good especially given the different hill climb courses we have in the uk
     
  6. gnichols
    Joined: Mar 6, 2008
    Posts: 11,392

    gnichols
    Member
    from Tampa, FL

    And I'd love to see a zillion more pix of it. What a crazy-cool looking build! Gary
     
  7. robbovius
    Joined: Aug 4, 2013
    Posts: 12

    robbovius
    Member

    In this installation seems more like a really clever way to get the chassis as low as possible, without the tranny/driveshaft tunnel causing problems with interior space. notice how the chains angle up to the rear axle?

    that's about the lowest A7 special I've seen.
     
  8. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

    Bob, someone on another forum is interested in this car. Do you have any more info on it?
     

    Attached Files:

  9. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

    Never mind, they found more pix and info on where the car is located.
    thanks,
     
  10. Stretchmobile
    Joined: Oct 29, 2013
    Posts: 108

    Stretchmobile
    Member
    from So Cal

    Where is the info and pictures? I was kind of looking forwards to it.
     
  11. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

  12. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,432

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    Anybody know what happened to banjeaux bob? Seems like he fell off the edge of the earth. No posts from him on this thread since 2/11.
     
  13. Stretchmobile
    Joined: Oct 29, 2013
    Posts: 108

    Stretchmobile
    Member
    from So Cal

    Last "activity" was 2/25 at 8:54? Maybe cat has his tongue?
     
  14. gnichols
    Joined: Mar 6, 2008
    Posts: 11,392

    gnichols
    Member
    from Tampa, FL

    Frozen typewriter? If it's cold in the upper plains and Canada, can you imagine how folks are holding up in Alaska? Gary
     
  15. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,432

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    Maybe he ran out of de-icing fluid.
     
  16. Ned Ludd
    Joined: May 15, 2009
    Posts: 5,209

    Ned Ludd
    Member

    He was posting on Facebook today.
     
  17. 64 DODGE 440
    Joined: Sep 2, 2006
    Posts: 4,432

    64 DODGE 440
    ALLIANCE MEMBER
    from so cal

    Good to know he's still out there. :D
     
  18. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

    I ran across this one today that I've not seen here.
     

    Attached Files:

  19. Marticelli
    Joined: Aug 23, 2012
    Posts: 20

    Marticelli
    Member

    Re the question in #5469 above, I posted large clear pics of the rare AZA cyclecar in #5214 above (page 261) on 17 January 2014, which I took when I visited the Mahymobile Museum on Leuze, Belgium some years ago. The Mahy brothers Ivan and Ghislain own approx 1100 vehicles which are displayed at the Mahymobiles Museum in Leuze (approx 700) and also at the Autoworld Museum in the Cinquantenaire in the centre of Brussels (about 400 vehicles).

    Ivan explained that he thought this was either a unique one-off or a very limited edition vehicle and the de Dion single cylinder engine it uses dates from earlier than the car itself which is circa 1908.

    Marticelli
     
    Last edited: Mar 2, 2014
  20. fredvv44
    Joined: Dec 11, 2013
    Posts: 663

    fredvv44
    Member

    Thanks Marticelli. I found the museum and will have to visit the net time I'm over there; looks like a good place to spend a day.

    An interesting car and I didn't know but thought it might be a "one off". Lovely design.
     
  21. Marticelli
    Joined: Aug 23, 2012
    Posts: 20

    Marticelli
    Member

    When I visited the ,museum some years ago, it was only open occasionally but you can make plans by contacting the museum through the website so they can br there by arrangement. You will be assured of a good welcome as they are very much enthusiasts themselves. Certainly an amazing place to see different things from the average.

    The collection was started by Mahy pere during the war when he bought an incomplete Model T Ford, and it just snowballed from there. Quite a respponsibility looking after such a large collection!! I have difficulty with a few nice cars and motorcycles, never mind over a thousand.

    Have a good trip!

    Marticelli
     
  22. porsche930dude
    Joined: Jan 5, 2008
    Posts: 275

    porsche930dude
    Member

    I dont know what this one is
     

    Attached Files:

    brayton engine guy likes this.
  23. gnichols
    Joined: Mar 6, 2008
    Posts: 11,392

    gnichols
    Member
    from Tampa, FL

    A baby Spad with training wheels, what else! Gary
     
  24. UKAde
    Joined: Nov 13, 2002
    Posts: 502

    UKAde
    Member
    from Oxford UK

    Lots happening on the Jappic recreation at the moment ,

    Wheels are with the wheel builder should be with me in a month ,hope to have a back axle assembled by then ,
    Front axle kingpin assemblies are with a friend , he is finishing the fabricated ones I had made a few months ago , he is also making the steering arms ,
    I have nearly done the steering column the parts for the outer are done just kneed brazing together inner part needs some machined parts done ,
    Engine is off being rebuilt ,,
    Front and rear spring seats are off the chassis ageing having a few parts brazed to them then it's blasting painting and back on the chassis for good this time

    Latest pics in fliker or check out my Facebook page Jappic recreation
     
  25. Looks a little more like a Tiger Moth :D
     
  26. Kume
    Joined: Jan 23, 2010
    Posts: 990

    Kume
    Member

    The Jappic is looking stunning - love the nose fabrication and the brazing work.
    Did you ever find out what that 'unknown V4' was from?
     
  27. UKAde
    Joined: Nov 13, 2002
    Posts: 502

    UKAde
    Member
    from Oxford UK

    I think the owner has sold it now , the general thought was it was a boat engine , nice thing would have green great in a cycle car
     
  28. Kume
    Joined: Jan 23, 2010
    Posts: 990

    Kume
    Member

    any thoughts on this as a candidate for a cycle car. Jap motor said to be 500cc standard equipment on an atco lawnmower from the 1930s.
     

    Attached Files:

  29. Stretchmobile
    Joined: Oct 29, 2013
    Posts: 108

    Stretchmobile
    Member
    from So Cal

    I can't see where anyone insulted Banjeaux Bob. Wonder why he hasn't posted. He was on the HAMB the first of the month. I enjoyed all the pictures he posted. Hmmm.
     
  30. gnichols
    Joined: Mar 6, 2008
    Posts: 11,392

    gnichols
    Member
    from Tampa, FL

    I'd like to know if he's ok first of all, then have him back posting daily! Gary
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.