Register now to get rid of these ads!

TECH TIP Clean easy way to add trans/rear oil

Discussion in 'The Hokey Ass Message Board' started by Andy, Feb 26, 2014.

  1. Andy
    Joined: Nov 17, 2002
    Posts: 5,480

    Andy
    Member

    Fooling with an MerCruser out drive lower unit, I discovered how oil is added. There is a hand pump that screws into the top of a quart bottle and a hose that goes to the lower unit. Oil does not spill out of the container like when you try to fill straight from it. You don't need a suction pump that leaks everywhere. You can put the hose in a fill hole on a trans or rear end and just pump away. The whole rig is about $5. I got mine at WalMart. I keep it in a zip lock bag so it stays clean.
     
  2. scrap metal 48
    Joined: Sep 6, 2009
    Posts: 6,128

    scrap metal 48
    Member

    Sounds good.. What section of the store did you find the pump??
     
  3. Deuced Up!
    Joined: Feb 8, 2008
    Posts: 4,224

    Deuced Up!
    Member

    post a photo if you can...
     
  4. I got one from Amazon when I had to fill the trans on my wife's OT Explorer. They are very handy. You can search for Plews/Edelmann 55001 1-Qt. Lubrimatic Fluid Pump. There are several brands.

    I also keep my in a Ziploc bag as well. Really no other way to keep it clean and keep the mess contained.

    Jeff
     
  5. I wonder if it would work with brake fluid. My master cylinder is under the seat in my model A and I am wondering how I am going to fill it without major spillage.
     
  6. 55 dude
    Joined: Jun 19, 2006
    Posts: 9,357

    55 dude
    Member

    head down to the local feed store and get a large syringe and slide hose on the end. that and a mirror will get the job done.
     
  7. good idea. Never thought of that.
     
  8. flthd31
    Joined: Aug 5, 2007
    Posts: 616

    flthd31
    Member

    I'm pretty shure this is what the op is talking about.
     

    Attached Files:

  9. brokenspoke
    Joined: Jul 26, 2005
    Posts: 2,993

    brokenspoke
    Member

    I wonder if a GO JO hand soap pump will do the same thing?
     
  10. 3wLarry
    Joined: Mar 11, 2005
    Posts: 12,804

    3wLarry
    Member Emeritus
    from Owasso, Ok

    dude...walmart is NOT traditional...:p
     
    kidcampbell71 likes this.
  11. jkski
    Joined: Jan 27, 2009
    Posts: 137

    jkski
    Member

    at walmart it's "mercury quickslver gear lube pump",it was $9.95 .
     
  12. cut an access panel
     
  13. 29moonshine
    Joined: Dec 30, 2006
    Posts: 1,360

    29moonshine
    Member

    works good for me
     
  14. oldsjoe
    Joined: May 2, 2011
    Posts: 2,655

    oldsjoe
    Member

    NICE! Handy information thanks!
     
  15. Had one like the above photo for years, got at auto parts (almost any) store.
     
  16. aaggie
    Joined: Nov 21, 2009
    Posts: 2,530

    aaggie
    Member

    You can use a reverse bleeder setup like Phoenix to fill a master cylinder from a bleeder screw on a caliper. On my '40 Chevy I made an access plate in the floor and made the carpet with a fold back flap to expose the cover.
     
  17. Andy
    Joined: Nov 17, 2002
    Posts: 5,480

    Andy
    Member

    Here are a couple of pics of my rig. The plunger is upside down in the pic and the extension to get to the bottom of the jug is the white tube at the bottom. It was in the boat section at Walmart.
     

    Attached Files:

  18. hotroddon
    Joined: Sep 22, 2007
    Posts: 28,241

    hotroddon
    Member

    Sta Lube has sold those for the last 40 years or more. You an get them at Any auto parts store, or even Harbor Fright
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.