Art & Inspiration Sitting and Rotting.............picture thread

Nice find. Wish I could find those around here.

 

....

 

Do have an idea what year and model car that is next to the fence in Post #8204?

 

28 model A
Rod

 

The one in the 3rd pic, next to the fence posts; looks like an early Dodge screen side to me?

 

....

 

You would probably be right too, I would guess 22-24.
Had to look real hard to see the fence.
Reckon that the Model A is alongside a shed then ?
Cheers

 

The one on the right is an International. With A LOT of work the Chevy might be save-able, but you'd need to cut down the forest to get it out of there.

 

More pictures of the Chevy & the International

 

Yes....3rd photo is of a Dodge Brothers screenside.

 

This 34 Ford was saved after surviving a gr*** fire. MrEngels on the HAMB

 

I guess I should have said what year and model car is next to the wood Building(?), not the (wood) fence. Sorry.

 

Anyone interested in this find I believe it is a Morris Crowley 1951


Posted using the Full Custom H.A.M.B. App!

 

I knew what you meant tom
cheers
Rod

 

At the start of the Birdsville Track.

 

Dang! I need a drivers door for an International just like that one! Been looking for months and nothing so far. Any chance that one could be had?

 

Just last week I discovered this '64 El Camino sitting in a barn here in Bremond. Been sitting in this spot since '90. The car is rust-free and an original Texas car. All original except for the Targetmaster 350 that's in it. I am going to try and secure it before that barn collapses on it.

 

^Better hurry....that garage does not look to be long for this world.

 

Anybody in the market for some clapped out Edsels? These could probably be had for just a little over s**** prices since the yard is crushing everything out.





this one looks like it has vacuum power windows.

 

Old chevy...

 

Man I could use a couple pieces off that cab...

 

Power windows maybe, but they would have been electric, not vacuum operated. The little sliding ****ons are the door locks, and they're not power ***isted.
If you want to salvage anything, grab the Teletouch transmission motor unit and all the relays on the firewall for rebuildable cores. The smaller series '58s and all the '59s have the regular Ford 9-inch rear ends as well.
Edsel aficionado/genius Phil Skinner keeps a very comprehensive registry of serial number and dataplate info; the plates are in the driver's door jamb if you get the chance to look and copy them down.

Where are these cars? Thanks for spotting them!

 

The truck cab is '37 Ford, a one year body style. Doors and back of cab interchange with '35-'36, but '37 has split V windshield while '35-'36 has flat windshield.

 

Those old pickup boxes are keepers too. I've seen some folks convert them into shelves, benches or display racks for other stuff.

 

I ***umed the slider looking things were power window switches since I didn't see any window crank handles. I didn't look real hard but could see a big window motor sticking out of a door where the door panel was missing and they looked like vacuum to me, but I'm no expert. I do recall someone on here asking about the data plate info, and I have pics of the ones I could get the doors open far enough on. Some were missing however.

This yard used to be really big, and I've spent hours wandering through it, but all good things must come to an end I guess as its almost all crushed out compared to what it was the last time I was there. Its the old Van's auto salvage just south of Lathrop on hwy 69. The old man who owned it died a while back and the wife wanted it cleared out, so the sons have been crushing cars since. The guy I spoke to said it should be done in less than two years. So I'm putting this out there since I hate seeing old iron crushed, go get this stuff while you still can! Saturdays is the best time to find somebody around. If anyone needs better directions PM me and I can tell you exactly how to get there.

 

Somewhere in MO near Cape G .....

 

"62 (really a 1961) Lincoln Conv " in Lamoine Maine, found "online", Lamoine is a long way from me too!

 

Actually, that's a '61, with that heavy bar through the grill. Probably even more uncommon than a '62. Shame to see it like that.

 

Looks like a lot more interesting stuff in the background.
Any more pics?

Looks like the guy would consider having a Auction instead. Crushing would be less h***le but it could pay off a lot more having a auction and with a reserve set, or a s**** price by bidder, there wouldnt be anything lost and the small items he probably has would be gauranteed to bring more than s**** price,not to mention he would be saving a lot of old tin.

 

https://www.youtube.com/watch?v=fz8HVogkiKU