Technical 1930 ford tudor dimensions

Hi all I recently picked a 1930 Ford Tudor project. I am wanting to build a sub-frame for the body to channel it and align the body parts. I received it with no bracing to keep it square and need the measurement between the b-pillar posts to tack in some braces. any help is appreciated!!

 

this question seems to come up often
http://www.jalopyjournal.com/forum/showthread.php?t=194414&highlight=model+tudor+dimensions

 

51 1/2 inside b pillar to b pillar, mine has been chopped 3 inches, the measurement was above that

 

Is that at the top of the post?


Posted using the Full Custom H.A.M.B. App!

 

Here we go

 

That is a good pic, but it does not include what I need.



Posted using the Full Custom H.A.M.B. App!

 

You're going to have to get extremely specific then. I have a stock 30 tudor. I rolled the rear windows down and measured from the rounded, lower, forward corner of the rear side window openings, just outside the gl***. I got 51.25 inches.

 

Here......

 

Thanks for taking the time to do that!! The pic helps a lot.


Posted using the Full Custom H.A.M.B. App!