The Jalopy Journal
Buy a 4lb cap and take the Rad to a shop and have the neck changed to work with the new unit.
You need to remember the aftermarket suppliers are in the business of selling product. They never suggest what to use for any project. Those Brass...
I would never put a C-6 behind a 302 just due to the amount of power they use up for no return. I would however put a C-6 behind the FE before I...
I've been in your spot of needs a few times over the years. I found a Guy who targets 60's full size Ford's and has had everything I ever needed...
[IMG] That's nothing more than a stock 60-66 C-10 truck steering box.
I'd say the seller got lucky. It came out of someone's mind and a pile of material I'm afraid. The rest is up to you. What's up with that front...
This is interesting. I don't know a lot but over the years of Many F,E's and all in full size the only differences I ran into was the change in...
For sure Steve. I have also noticed the Rubber Nipples we use to cap off Vacc fittings are no longer the same. It's almost like they have more...
I will say I'm a big supporter of Pertronix. I currently have 4 vehicles with them in place and functioning very well and have been for years. I...
So I looked up the unit for the dist you're running. Spec's say Neg ground and 12-V. By my own experience I've learned they also like a steady...
I have seen those tie rod spacers before. They came with a tapered insert so the bolt would seat properly in the steering arm hole. If they are...
To find out if it's Caster related a simple test would be to just remove the wedges and drive it. If it changes for better or worse, you know...
If you're not using a Stock T frame no matter what or who's frame you choose you will need to make it fit. The other side of this is to build your...
Dennis Carpenter says both 300 and 500 series use the same back glass weatherstrip part number 57A-6642084-A
All I'm thinking is that there are so many different levels of building today that I seldom discourage anyone. I will say that if Mig Welding on a...
Dang, I hate it when that happens. This is going to hurt your Wallet. Sounds like it's over your qualifications, (no disrespect) Maybe go back to...
The way I read the opening post sounds to me like O.P. paulsherman is working with a lot of unknown. My intent was to help him avoid needing...
Once the job is behind you you'll think, "that was simple"! FIRST OFF!! If it's a posi track DO NOT turn one axle after removing the other!...
That is a major deal for sure. Bottom center must make contact when finished. To do that means whatever amount comes off at the rear most corner...
^^^^^^^^^^^^^ 59 Ford?
This has to do until I find a Crestliner wheel that doesn't require a second Morgage on my house to replace it with. [ATTACH]
Been watching this post and it just makes me Sad watching time (I'm 77 years young) replay itself again and again only once done with this process...
Sometimes it just takes a nudge to make a Large change in what we do and how we do it. If you can Gas weld, you can Tig weld and the total change...
I'm shocked at how cost effective new Tig Welders are and how many home builders still insist on Mig Welding body panels. Must be the use of Body...
Here's what his product looks like installed after several hours of "modifying". Yes, you can install them as produced but they weren't even the...
Yes and No. Fatman made some. 2 different styles. Neither were perfect. They are now out of business I've heard. Probably should verify that. I...
Correct Abe, 2 different wheelbases in 57 for Ford cars however the Hardtop series is the 500 and it happens to be longer one at 118". That's for...
Separate names with a comma.
The Jalopy Journal
