The Jalopy Journal
The wife’s turn tonight [ATTACH]
The pic came from a shop building some kind of large speedster
I bought a th400 that was pulled from a wreck and set on a shop floor for over 10 years $150 bucks and replaced the seals and a filter change....
[ATTACH]
Back of the cam card [ATTACH]
C v16 LS
If I remember correctly the back of the card list the rocker ratio
I’ll take a better pic of the card and check the back side when I get home Edit: was able to revert the card pic back to original [ATTACH]
Dang skippy I’d drive that
I keep getting what seems conflicting internet info. Some say the trucks all used the same cam from mid 50s up,235-261 The engine I’m using is...
Cool. Thanks.
Have an Edmund’s 2x1 with yfs. Found a W1 locally and looking for one more almost bought a 3x1 but don’t think the rear carb would fit the AD truck
Picked up a NOS General Kenetics cam [ATTACH] seems very mild. But building a simple cruiser Here’s the catalogue info [ATTACH] For a .060 235...
My buddy said “ we’ll find out” I’m wondering myself
Ok. Laugh all ya like. 283 crank pulled from a “rebuilt” engine. They were 1/2 correct. Had a crank kit, new cam and lifters with a hone and go....
Mixed Thursday. Told the students to set the leftover on a shelf. Watching to see how much it shrinks. So far looks like none [ATTACH] mixed also...
Shop temp was not optimal at all 2.0 is the largest tip we have TDS says a 1.8 will work so we’ll try that next. We did reduce it. That crap won’t...
[ATTACH] the current swap is anyways the most fun
Messing with an R10 OD Had this solenoid that came with some parts [ATTACH] Works. Came with a gm set up so should be 12v still cleaning it up to...
Brake shoes can be found by size. Drum diameter and width. Casting numbers on wheel cyls are helpful The hardware can be found by brake...
The axle housing flange and measurements is a good place to figure it out
Killer. I thought tech schools had disappeared:)
Cleaning up junk [ATTACH]
Wheel offsets work [ATTACH] The skirt will be close on the cap. Clears the OT front binders White or blue wherls? Leaning towards blue
Dude has a box full of pilot bushings. Some still in offenhouser wrappers. This one was settin on top when I walked by. It looked like the one I...
Some ugly red mats for my merc, a flathead trans to sbc pilot bushing, carb linkage parts, chrome oil caps and a keychain thermometer [ATTACH]
Here’s a link to a lot of pics https://www.tripadvisor.com/Attraction_Review-g30375-d516494-Reviews-Alabama_Theatre-Birmingham_Alabama.html The...
Picked up a pilot bushing adapter. Not every day you find one on a shelf [ATTACH] Bottom is the new one
Casablanca at the a Alabama Theater [ATTACH] [ATTACH]
Separate names with a comma.
The Jalopy Journal
