The Jalopy Journal
Exactly make sure you can keep up ! And by all means let’s stay on the OP issues. Deyomatic is the OP. He’s obviously talking about his...
Seemingly arrogant if you ask me ^ ^^^’ Get a better handle on this and we can discuss it further if you want . Not arrogant ^^ Here we...
I was resting,,, But You can have the last word while I watch cartoons. It’s a good one even if your not a Rick and Morty fan [MEDIA]
I didn’t mean to derail the thread here, just thought it was interesting what happened. Anyway, I find it difficult to get a box in the...
Bingo- It doesn’t get easier, it’s 10x more complicated.
So what gear ratio does this riviera have? most old luxury cars with torque monster engines had a 2.XX rear gear. 1 because the engine could...
Those are the ones that like to get reversed right?
Ok, it’s not easy to go get parts at the corner for a nailhead. But what’s he going to need for it? There’s a whole world of restomod stuff...
[ATTACH] [ATTACH] Maybe they are worth grabbing? Don’t know anything else yet
“If the pivots miss this axis by a little bit ,,,” I believe you’re talking about all of the chassis set ups with ladder bars or split bones....
That drawing works if the pivot is the front drive shaft Ujoint . But it can’t be with ladder bars or split bones the pivot winds up off the...
@corncobcoupe @Moriarity
The Rochester GM tri power set up is easy as can be. The center carb has the idle circuit , the end carbs need to seal air when closed and not...
Was this guy a HAMB member?
I put a 401 nailhead into a Pontiac FB once. my 66 GS rotted but ran good and the FB had a SBC with extra holes in the block. Couple nights...
Draw it up, I want to see it happen as you say. I’ll wait. Hell use Pete and Jake’s artwork. You’re mixing banjo thinking with splayed...
Yep, wife’s got the new one picked out and it’s couple grand, on sale.
Guess what took a shit today? Just guess
Fine computer artistry there, Way better than I could do, look at all the different lines in there by the joints. Fascinating! However it’s set...
Get a better handle on this and we can talk some more if you want. Since you’re talking about a gravity based angle finder, either weighted...
When describing a set of angles either verbally or graphically , in any scenario including driveline angles it’s always left to right and...
No yeah buts about it. Perhaps a definition of terms : Pinion angels is referenced off the ground, level ground makes it easier to measure....
If the drive shaft moves up and down in relation to the frame or floorboard reference then the U joint operating angles are changing too.
I’m not sure when the first cowl steer set up was conceived and put onto a hot rod. But let’s just say 50 years, 1973 is that realistic? Maybe...
You get into trouble when lowering a rig and the trans yoke gets below the pinion. Once the drive shaft starts going uphill towards the rear...
Oh my, I’d have to find a marker, a straight edge, a knife and a big enough open flat spot to do all that and hunt up the cardboard.
That’s an email address, ? At least when I clic on it it’s trying to send an email
I tried to find it, a picture, a price, the vendor. I came up with nothing except a logo contest
Get a couple yard sticks from the dollar store.
originally,,,, question is if anyone has had experience with Outlaw Hot Rod Parts cowl steering boxes.
Separate names with a comma.
The Jalopy Journal
