The Jalopy Journal
Do NOT use Old Air a/c unit!!! Go with a Vintage air. Have one in my daily driver.[ATTACH] Also here in AZ. Installed an Old Air unit in a...
No idea who built the aluminum body or for that matter the frame (steel). Could find no info on the car.
Carb cleaner works good as well.
Have a couple of pieces at GTI now, will let you know how they turned out. Have used Concoures (sp??) over at 21 ave off Mountain View. Always...
The IFS will change caster as it travels if it is installed correctly. Looking from a the side the lower pivot bolt is usually at the same plane...
I hope you are welding it first, not using lead to fill the seam. the body will flex and you will get cracks in the leaded seam over time.
They do not have two separate pistons. There is one that has two pistons on it. What makes one engage sooner is the placement of the bypass holes...
I used it on my 34 Ford. Never had "good" brakes. It will adsorb air. Had it in another car and then changed to Dot 4, brakes worked much better....
Should be plenty available since everyone else gets rid of them! That should tell you something.
The helmets are real, the welder is a toy I made. I will teach them in a couple of years.
For the past three years my 5 year old grandson has asked Santa for a welder. So last Christmas I built one for him and his 3 year old brother....
[ATTACH][/ATTACH] Had this 1953 for a year and a half or so.
[ATTACH] Forgot to include this on. 99 F250 diesel to pull my racecar trailer
[ATTACH] Drove this truck over 50K miles. Built it in 1993, sold it and bought it back, and sold it again.[ATTACH] Had this one about a year and...
[ATTACH] Sorry for all of the posts but it would not let me put them all in at once for some reason.
[attach]
The stock Pontiac front hubs were spindle mount. You need to use rear hubs. There is a RH thread and a LH thread stud. When I built my 34 I used...
[ATTACH] Photo of the power hammer and the bead roller I just finished making. Power hammer is sort of a Dake copy but deeper and modified...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
There was an article in I believe Street Rodder mag a couple of months ago showing this. Good job.
I would say around 10K or so.
[ATTACH] Make it your self. This is one I did for my 34 Ford Tudor years ago. Found a sand buggy ( after market ) foam covered steering wheel at...
If you can adjust the pressure relief valve, that is the best way. Do not go to a shorter spring, go to a softer spring, ie; more coils at the...
[ATTACH]I don't believe that the photo of the smaller section in the middle of the hood area is what he is referring to. To me to pancake the hood...
[ATTACH] Shot of the new power hammer and bead roller I just finished. Seeing what you three have done makes me want to get out there and use...
are the dies delrin or nylon?
Several years ago two of my friends went from AZ to Kansas to pick up a 32 roadster from a farmer. They stopped along side of the road to make...
Years ago we had our 34 Tudor out and went to a small town for lunch. we were watching the cars go by on the highway and saw a car go by, turn...
Since we first started selling parts we tried very hard to include everything you need to finish a job. It used to drive me insane trying to put a...
THat 35 with the 34 grille could have been built in South America. They kept building these body styles way after up here. A friend brought two...
Separate names with a comma.
The Jalopy Journal
