The Jalopy Journal
Either a Model A or '49 -'51 Ford.
You should have asked here first because the fuel pump can be re-clocked and you wouldn't have had to re-route your lines. All is good and now you...
And the third world countries do not have 8 lawyers for every 2 people.:eek:
Suck it up butter cup.:D
[ATTACH] This may be too far gone but yours isn't.
Stick one of those shark fin antennas on either side of the roof just above the rain gutter and prepare for take off.:D
One man's junk is another man's tools. Necessity is the mother of invention. Caveman metal forming = using whatever you have access to and using...
@wheeltramp brian, is there enough clearance to remove the filter or do you have to raise the engine? I suppose you could shorten the threaded...
This is your best answer to your oil filter problem. https://www.summitracing.com/parts/sum-g4985-1 The pressure sending unit should still fit...
Yep it is the gasket and also check the seating surfaces for the gasket closely for any imperfections. Also, always "presume" and never "assume"...
Looks like brass. Can you drill it underneath to determine if it is solid brass or plated pot metal? Brasso is the best brass polish and will...
Still just a beat up old shivrola.
Thats easy. You got a old shivrola truck, pre '64, straight 6, with a chrome "grill" and a smashed up right front fender.
Just a WAG as the original poster stated he could get a re-ring kit for $250. Valve seals shouldn't bump the price any more than $25 and he didn't...
I hope it is pre 1964. If not don't mention it.
Get the $275 re-ring set that has all the gaskets and valve seals. Get a new timing chain while you're in there. Hone the cylinder walls, hand lap...
1949 Dodge front wheels.
A lot worse than that was said. Down right sacrilege to perpetuate such an abomination. Then I reminded them that they started it with their sbc.
WHAT BLUE IS THIS? Same color as my pants.
Once the smoke leaks out of the wire or the fuel gauge in your case:eek: you need a new one.:( As stated before grounds. Check to see if the...
Fake hemi sbc. Kind of like putting a sbc in your Model A or '32 or any other Ford product. Several years ago i put a 390 Ford in an OT impala and...
If it is a '32 chebbie paint it orange and tell everyone it was the original vettte prototype:eek:. If it is a '32 Ford:mad: no one cares about a...
@livertucky HELLUVA good question.
Rotisserie is the best way. Frame off and nothing in the way but you still want to drive it. I have used all above mentioned and all work but none...
When I was in high school I worked at a body shop and the owner told me when he was my age looking for a job. He went into a well known shop in...
Best attitude you can have when you have a love of these old cars. Sometimes when you cut away the rust and it reveals even more rust you might...
Stock on a 1951 Dodge as a $3.00 dealer add on. You have to roll down the window to aim it. That is what the white knob is for. When you roll down...
Those will be a work of art when they are done. I hope you are planning to have them coated both inside and out to preserve them for a millennium....
That is a common thing that happens but you beat me to the solution. Keep on keepin on and it will reward you.
Try showing the entire frame to give us some more to go on.
Separate names with a comma.
The Jalopy Journal
