The Jalopy Journal
Only when you run a crab dist.That's why Henry changed it. T
How cum you have timing set from a 59a on there and not 8ba? They have opposite thrust directions. T
59 A factory came with studs 8BA had bolts. http://www.vanpeltsales.com/FH_web/FH_images/FH_engine-pics/Flathead_Engine_crankandcam_1940to48.JPG T
Vacuum gauge tells all. T
Welding and lathe work not likely,all that drive is hardened and welding will kill that besides where are you going to get the donor part...
It will be cooked in there with carbon. Remove the bolt rotate the pump by the housing,soak with penetrating oil rotate some more more oil and it...
You will go broke buying what is missing. There are no pilots you need a few to start.11/32" +001" +.002" +.003" 5/16" in same and again in3/8"....
17 is an air cooled series so is 18 a series but water cooled. T
Here u go :D http://www.locknstitch.com/ T
You need lots of heat a tig welder and foot pedal here is a real asset.I have done dozens and dozens from 6/32 to 3/4"and never been beaten.On the...
A good water cooled 20 series torch is way easier to use than a cheap torch with vinyl lines or an air cooled assembly.By the sounds of your post...
Tig must be argon no C02 mix will work.Other inert gas mixes will work with argon but not C02. T
Yup x2 real easy T
You are inline for a torch body.Not very expensive on its own.What is it a 17 or 20 series.There is a difference between stripped threads and...
Here's one http://jalopnik.com/315982/ass+kickin-engine-of-the-day-gmc-twin+six-v12?tag=carsengine T
Composite gaskets dry and head bolts use permatex #3 T
Studebaker Commander 245 http://www.jalopyjournal.com/forum/showthread.php?t=429644&showall=1 post# 38 T
More info
Here is what you need to see. T
Don't hold back."LOL" :D
Bit red neckish.
What type grinder would do this job?
Who rebuilt this engine?
Drive it
Here is info you need http://www.chevytech.com/2c50o3.html T
You have a good list going. I would change a couple of things. Standard melling pump not high volume no need to have,no advantage. 1.5" valves...
Need more info something here is off the rails you should have a bolt on !!!!!
You can prepare the block for the 95% filter leave out the internal plug and drive on. I mention this to you now as the drill and tap procedure is...
As stated if it is the stock bypass filter then you can put the external plug in the block and plug the small hole in the pan rail and you are...
8ba or 59a?? Where are your lines going to on the filter adapter. You may have them reversed! That will lead to a problem.. T
Separate names with a comma.
The Jalopy Journal
