The Jalopy Journal
I told you I'd help with a cruise around Lake CDA. I know of some fun roads... one section has a tiny bit of dirt.
Phillips head screws weren't invented until the late 1930's I know this is a 1950's era build and Phillips heads might have been used but wouldn't...
Clayton, I hope you replaced the carrier thrust washes with bronze or rollers. Mike
[IMG] This bus is driven quite a bit on local Spokane V-8 ford club tours
Have you talked to Chris, He told me today he is delivering a car on Wednesday.
Antique Auto Ranch 509-535-7789
This was on the way to the E.vs W. run. It was so COLD! Good thing at fuel stops the radiator made for a good roadside heater. For those of you...
Flat or curved headlamp lens?
Gosh you guys don't even know. She Loves this stuff. Here is her car. [IMG] Here is the "No Dollar Special" on the NWVS run. My uncle is the...
This Model T is a hand cranker, lights are Mag powered and so is the horn.
More Photos from this summer The address of the Antique auto ranch is 2225 N Dollar Rd. I have put on about 1000 miles since labor day
Being active in my car clubs has it's complications. I run around with the Spokane Model T Club, Thee inland Emperors, The Spokane Early Ford V8...
Strong Engine 509-891-6461
Kinda bummed that Mike sold that A. I have done a lot of work on that Model A for him over the years. The Last thing he did was have me install...
Alan Stacy a Spokane Model T club member and the man that put together the east side trophy for the reliability run passed away last night. Alan...
http://www.myspace.com/superttour/blog Tom Carnegie drove 10,000 Mils in a Model T in one sitting. He did roughly 225 miles a day.
I'll be there
This past weekend was the Long beach swap meet. I live in Spokane and was not there; but photos of Gabby's car were posted on MTFCA.com. Who now...
That yellow model A belongs to Sid Guevera from Idaho. He came in last week with his car on the front page of the Whitman county paper. Sid wad...
Len Bush :)
MrModelT IS FLYING UP TO SPOKANE WITH A MODEL T ENGINE MAY 1ST. PM HIM.
Some more of Auto Boat! Tyler's Wassabi Roadster, and Pedro with George Barris and John D'Augostino.
The aluminum Canadian head is lower compression than the cast head.
I figure if I use Chevy spindles I will have 2" of clearance before the stock T oil pan drags.
I lost a 1/2", and the spring had to be shortened 4 inches. A Crosley front leaf spring is almost the correct length but the hole for the spring...
By bending before the perches it adds an extra inch to the drop.
On the MTFCA forum there is a discussion on the many ways you can lower a Model T. One contributor posted photos of Gabby's T. I thought the...
I'm from Spokane and have a 37 humpback as well. I work over at the Antique Auto Ranch @ 2225 N dollar. You should come by and check out the yard....
Nope for sale.
Here she be, This car came from Oregon.
Separate names with a comma.
The Jalopy Journal
