The Jalopy Journal
Thanks to HRP's advice I'm on my way home right now after spending $600 for a Ford 9" out of a 76' Bronco. It's the correct width and bolt...
Thank you for the update Rich! Things ARE turning for the better!!
Frank is one of the good ones. He's a wealth of knowledge and willing to share for anyone willing to learn. Get well soon Frank
Thanks HRP, that's what I was looking for!
You read my mind, something that would work well. It doesn't have to be a bulletproof 9" either. Just a replacement that would withstand 200 HP...
Pickup
I'm looking for a width outside of drum to outside of drum for a 34' Ford truck. Thank you in advance. -Kirk
It is possible to go from a electronic speedo to a mechanical speedo. You have to swap out to a mechanical speedo tailshaft and swap out the...
I must admit that I am a bit biased to this one.....[ATTACH]
I acquired a 57' 365" Caddy motor with 36,xxx miles on it. It came from a burned up car. Apparently 10 yrs priority when it burned just a splash...
I've used PPG's Flex-n-flat with good results. Sprays well with only 2 coats recommended coats.
Another Wimbledon white.....
Wimbledon white it is
I utilized a HotHeads Dodge Hemi to Chevy 4 spd adapter. A T5 has the same bolt pattern as a 4spd if you redrill the mounting holes just a bit....
Going to build either a 32' or 33/34' pickup with a (ahem) modern drivetrain to be used as a daily driver next year and on.
You could always take a deposit which reads something to the affect of, "the money received is for holding the vehicle for xx amount of days then...
Go for it! do a check list, visually go over everything, check for loose bolts on the vitals (tranny/motor mounts, suspension/steering...
I've yet to ever of been to this swap. How has it been in the past?
Yes, as stated previously send TV a pm. He's a helluva nice guy ta boot.
With smaller parts you seem to have more control over how the paint lays down. By no means am I a pro but for instance painting everything at...
[ATTACH] I utilized some Simple I beam that I had out back and a Low Buck tools head. It has a 4' 6" throat and [ATTACH] works quite well with...
I'd have to say that I'm a bit partial to the current Novenber issue as it has my car on the cover. Yes I'm beyond stoked!
I'm all about a hard chop but there is this thing called driveability.....
Whom ever you choose DO NOT choose WoodArt! They are incompetent in filling single orders. They will take your order then refuse to ever talk to...
You may know this already but Studebaker adjustable rockers are a bolt in. Definitely beneficial when going to choose a cam.
[ATTACH] [ATTACH] Definitely a deicing tank of sorts. I have one very similar with the float & fill at each end.
I would assume that with a spacer adapter would work. If still wanting to use the Howe HTOB I would adjust the pedal where it is just enough to...
Here is the Howe unit that I took out. It's just slightly under 2". I don't have the exact measurement of the other HTOB but it was at least...
I used a Howe Racing HTOB and had to change it out due to what I thought was failed seals. I ordered a RAM HTOB instead of another Howe unit and...
I hope to see you out there Frank. I plan on being out there tomorrow and through out the week in my heap
Separate names with a comma.
The Jalopy Journal
