The Jalopy Journal
Faulty starter? Staying engaged and making voltage?
@67drake [ATTACH]
I've just used a normal toggle switch in the past, with no problems. This time around I decided to use a relay. It's powered through an oil...
Might check with Chuck. https://www.chuckstrucksllc.com/about-us Good luck!
I like this better than VHT and have been using it for a while now. [ATTACH] It's not as thin and watery and goes on thicker. A denser coating,...
Well shucks! Just got off the phone with Weedburner 40 and parts are inbound!! Thanks guys for all your input...I appreciate it! Super stoked to...
I checked Weedetr and didn't see anything listed for the jailbar. Frame is 29", center. I'd like more stability...little divey in the front, even...
I've looked it over for awhile now and have half a clue, just wondering what others have used. I've done the yard thing several times and nothing....
Thinking about one for my '46 pickup. I want easy. Anybody done one of these? o_O
Dunno...try swapping the two small wires on the solenoid.
From Motors Manual: [ATTACH] [ATTACH]
I had to research this when I got my BLC's for my heap. At first had no luck finding the right bulb in 12 volts. Being familiar with H-D's, I...
Pushrod length needs checked. Could explain things.
[ATTACH]
I used Harley Davidson #68715-64 in my lights. They're 12 volt.
Had my '65 Chevy pickup on a old center ram lift. Work all done...driver door was open...there was this fifty gallon drum of oil...happy...
[ATTACH]Yup. Hmm, wonder if the body was hinged...?
Haa...[ATTACH]
Vacuum advance, have one, is it working after the swap?
Parking brake cables can be flipped, so the end can be on the side the factory cable is located. Just a matter of connecting the two cables...
Isn't it supposed to have an end cap...? I thought the empty spline was to vent the lube, for rear axle travel...?
Now make some Hurst style SBC mounts that clear the mech. fuel pump;)
Yeah those perches are weird. The air shocks could probably be made to work. Make a crossmember for the shock tops and do what's necessary to...
^ this, or fuel draining back.
I'm no experto_O Assuming the float height is correct for the tank, possibly the sender resistance value (ohms), is incompatible for use with...
That block casting number comes up as: 1995-1999 350, 4 bolt, crate engines and ZZ4, roller cam, one piece rear seal. According to the interweb.
Happy 71...ya old Fossl!;)
The early caps vented freely, without any regulation. Later (smog) caps have regulated venting, usually a spring loaded valve that works on...
Defensive driving is the key to staying out of trouble. I drove to Seattle for work, forty miles one way, for over thirty years. I've seen it...
[ATTACH]I'm bored :p
Separate names with a comma.
The Jalopy Journal
