The Jalopy Journal
Just be aware that there are four input shaft lengths for a Ford T5, and at least three for a Gm T5. Plus the ones used in Chevettes, Datsun,...
Terminals are not all created equal either. I use only uninsulated brazed barrel terminals with adhesive lined shrink tube. I primarily use a T&B...
The front fenders will bolt to the body, but the front wheels are in the wrong place. The frame is different with a longer wheelbase and tread...
I ran into the same problem on a Jeep output shaft. The yoke they sell has a Toyota application but the spines are cut deeper. I sent the output...
1937 Ford brake and clutch pedal assembly with mounting bracket. $30 plus shipping
I have a similar one for my truck, but it has a pressure gauge in it to check the pressure
One time many years ago I was in the hinterlands of Japan. I needed some 6 volt parking light bulbs. I went to several garages looking for parking...
My signature line
https://prchotrod.com/prc-product/radiators/prc-custom-radiators/ I have used this outfit for my builds for 30 years now in many customer cars. I...
I bought a roll of Mylar film from McMaster Carr 30 years ago and still have some of it left. It cost $36. When I use the blaster the Mylar lasts...
It depends on how much you want to cut it up
Some Fords in the 60, and 70s had 9" rears with the small backing plate bolt pattern and wheel bearing used on the 8" mustang rear. You can use...
two left
I see some misinformation here There is no TV cable on a T350. There is a kickdown cable but it serves a entirely different function than a TV...
This is a narrowed rear spring for 44" perch centers. It fits 35 to 40 Ford cars and 41 pickup. $200 PM me
I have four NORS brake drums for a 40 Ford, front or rear Part number is 1672 branded as Century They have some surface rust but no deep...
Both rears are stripped down both ring and pinions are spoken for as are all the axles. I have one set of nice bells left, one set of bells with...
btt
Make a hammer form out of high density fiberboard and pound it out yourself [MEDIA]
I have a new old stock axle if you need it.
One more week and I am going to part these out. If you need parts, let me know
SOLD recent take offs I can have tires removed little to no rust showing $200 OBO shipping extra
NORS 15" by 6" factory made wide five wheels. a bit of surface rust from setting on the shelf. never had a tire mounted on either one. one bent...
New never used AJ40NH Posies rear spring. 44" perch centers $200 shipped in the 48. I also have three stock 36 to 40 Ford rear springs, No...
NOS Ford axle shaft never installed light rust in spots $150
I have two complete banjo rear ends. A 1939 and a 1940 both are complete with hydraulic brakes and the drums turn. The 40 has the rear spring and...
If you are buying new bags look for bags that have an internal bump stop. From the description of your bag leak, it sounds like it has been over...
Separate names with a comma.
The Jalopy Journal
