The Jalopy Journal
Some side photos would be good. Is it a mid 1950s Devin? Sent from my SM-J727U using The H.A.M.B. mobile app
Rear view[ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
Don Steadmon was another name associated with that action. I know he had alot of 40 Frord parts and helped with hard to find parts for my deluxe...
Here is the photo of my old drag car. Does anyone recognize it?[ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
I scored a 5 window deuce coupe similar to the one at 2:16 of the video. Mine has a two inch chop and a filled roof. I traced its history back to...
Washed the rod and collected some new windshield bugs.[ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
I used original cross members and Just a Hobby deuce rails. The rails that came with my car were too pitted and rusted. Since I had to get a...
Here is my rod.[ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
Yeah this is amusing in an aggravating way. I don't think some of the commenters are distinguishing between steel cars or fiberglass cars. I had a...
Nice build or preservation. I enjoyed talking with you at the show.[ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
I had a 264 2 barrel in a 40 coupe. Lots of torque. I did lose in a drag race with a 68 Road Runner. Sent from my SM-J727U using The H.A.M.B....
I don't know if this qualifies, but I saw it at a local show in central. [ATTACH] Sent from my SM-J727U using The H.A.M.B. mobile app
I won't lie, I copied yours Sent from my SM-J727U using The H.A.M.B. mobile app
I had that happen on a 40 Ford rear end, a DesMoines repair shop ground it down and sleeved and it worked out fine. The sleeves may be hard to...
I parked next to gentleman from Sioux City area who had a life long 32 Dodge/Plymouth 3 window coupe. His had vent openings (2) in the area where...
I built one in my 40 with a 39 trans. Seems there was a steel plate mounted to extend the plate for the below floor cylinder. Remember no check...
There was a narrowed 40 dash that came out of a 32 5 window here locally. Sent from my SM-J727U using The H.A.M.B. mobile app
Member car[ATTACH] Sent from my SM-J320V using The H.A.M.B. mobile app
I have my Dads guitar 1938 Nobility Arch top acoustic.[ATTACH] Sent from my SM-J320V using The H.A.M.B. mobile app
New radial tires, not radical. Sent from my SM-J320V using The H.A.M.B. mobile app
Ran the ceramic beads in the front on my deuce. I had Coker BFGoodrich bias plies. The beads helped but did not solve the problem. New radicals...
Ruining the restoration hobby one car at a time. Ruining the next generation one child or grand child at a time. Nicely done. Sent from my...
Below[ATTACH] Sent from my SM-J320V using The H.A.M.B. mobile app
Granville Brothers GB plane did it for me. Sent from my SM-J320V using The H.A.M.B. mobile app
The woody wagon line up was way cool Three steel Willys drag cars within 30 yards. Lots of quality and survivor Deuces I enjoyed it but about two...
I had a 55 Buick 264 in my 40 Ford hot rod, the combination fuel and vacuum pump was used by Buick back then. Other GM cars may have also used it....
Back in the late 60s I saw one with a hipo 289, it went like crazy. The 1.8 liter with twin carbs is a strong motor. I had one but the Volvo parts...
I am so in!! I have been to the Petersen museum once without the Deuces and it was great.
Dudes: I saw this on New Year's Eve in Minneapolis and a yellow 34 chevy coupe rolled by when we were leaving the studio. Out of sight, I loved...
I had the same metal lid, I made it into a rumble seat. The corner rubber stop supports suggest a rumble seat set up. Do Scoupe
Separate names with a comma.
The Jalopy Journal
