The Jalopy Journal
nope.. MSD guts in a stock dist. and a GM ign. module
right on hoop... i'll verify all my specs and #'s again, than take it from there- yanking the trans isn't that much of a pain in the ass- stay...
Thanks Gasser ... although i have been known to not give a fuck, i'm certainly not a rich guy- so saving some gas money sounds like a great...
Hoop... I'll varify speed with my gps on the way to the shop today... the tach is fresh from being repaired, as is the speedo.. How hard is it...
I. Got the trans through the guy who built my engine. It's a mid 80s camaro gear box with a s10 tail shaft.. and its a fresh rebuild.. ill make a...
Thanks for all the info guys.... Ed, I'll mark and count rotations later today. . As well as check the rpms at the speeds that were listed-...
Thanks man...it's been a long time coming!! I'm running the stock rocker assembly. . So 1.8:1... Posted using the Full Custom H.A.M.B. App!
I had a friend take some notes while I drove, this is what we got 1st. 2500 @25mph 2nd 3000 @40mph 3rd 3000 @ 55mph 4th 3000 @ 70mph 5th 2000 @...
my project is finally buzzing down the road.. just wondering what you olds guys are running in the way of rear end ratios, as well as what kind of...
Here ya go... http://www.jalopyjournal.com/forum/showthread.php?t=492451 Posted using the Full Custom H.A.M.B. App!
i'm running 37 spindles on my Model A ccpu... i researched the hell out of it, than decided to drop them myself, on the car with tires on the...
i finally got around to replacing the wood in the roof of my 30/31 closed cab pu.. it was long over due, the wood was totally wasted.. the result...
Thanks for the tips fellas... I took it back to the guy who rebuilt it.. lools like the overcharge caused the solder to melt and fly off the...
It's not a ford set up... 348 olds, with a delco charging system... Posted using the Full Custom H.A.M.B. App!
On my truck(31 closed cab) I have the rear stepped the widths of frame, hung the spring behind the rear, running a t spring with all the leaves(7...
While doing some fine tuning for a shakedown run something strange happened at idle. Suddenly the voltmeter(yes volt meter opted not to use an...
I did the same as everyone else, using the stock starter...relocated the solenoid , cut and rewelded the linkage between the solenoid and bendix...
I searched the topic a handful of ways, and came up empty handed... I'm looking to narrowing a set of rear fenders to use with my 31 wide bed...
i recently bough some from here... http://www.fastfittings.com/invertedflare
i should buy a lottery ticket, although i kinda feel like i hit it already.. don't worry... no clear coating over the rust....
nothing set in stone just yet... honestly i got kinda blindsided by it.. for now just getting it home and tucked away in my garage will be...
Just for the record.... i have been reading and hearing about stuff like this for years, always with a hint of disbelief, and then- i get a phone...
I recently came across a bunch of gauges, i was able to id most of them.. except for these- the SW Motor minder doesn't look like the any of the...
Subscribed... I'm building something similar-
here are some photo's... yes it's after the fact, but perhaps they will help someone else.. the first is a photo of the area mentioned... with a...
that fitting still doesn't solve the issue .... the through frame fitting however does- but thanks for passing the info along... I checked with...
Tman... originally i was trying to use stock parts, and the brake hoses are 1/4 IF, and to my knowledge (called dorman, and parker) no one makes a...
Excellent... I just orderd a set.. thanks again Willy!
I can post some images later... But Willy seems to have the answer!!! Have you used these before?? I only ask becouse i have read some stuff...
I'm having a bit of a brake line dilema.. Here is what i'm building... A full fendered 1930 Model A pick up truck.. 324 olds, t5 trans, 58/59...
Separate names with a comma.
The Jalopy Journal
