The Jalopy Journal
i'm going with 470
I would look out for any rust plugging your radiator or t-stat.
SBC 195cc Street Heads, straight plug w/heat riser, 65cc, complete w/parts $1,510.00 http://www.airflowresearch.com/index.php?cPath=24_29
I would stay way from anything procomp. they are cheap for a reason. how big of a cam are you using and what kind of rpm are you going to run. for...
I am trying to help out one of my co-works, he is looking for upper radiator suport brackets for his 41 ford pick up with a 4 cyl. his grand...
needs more boobs.
that is cool. good luck on your project. what are your plans for motor and trans?
i would also put in screw in rocker studs or have them pinned. i had a 283 with a cam that that had 412 lift on the intake and when i pulled the...
If anyone is interested i have a pair of 461 2.02 heads that have matching date codes that might be for sale if the price is right. They are bare...
if you want more rpm on the top side either go with a shorter tire or steeper gears. what tire size are you running? i see they are the et...
if it was the clutch packs they would only chatteron accel and around corners. if the whine is all the time and loads from side to side ( if...
ow much needs to be done on your heads? if you have to put alot of money in the i would think about the world products sportsman 2 heads. you can...
i think the coolest part is that your can look at the tourqe curves of each cam. and see how low the tourqe comes in and how long it stays.
no one on here has used this program?. its free to download and fun as hell to play with.
Has any one used ths program when building a motor? i found it on the comp cam website and can not stop playing with it!...
thanks for all the input. i think i am going to have my engine builder help me choose my cam. does anyone have a video of the 30-30 at idle.
i know they don't look as cool as the camel humps but it is going to take about 800-1000 dollars to rebuild them and do the port work. i can get s...
I am looking to run pump gas so i am thinking 10-10.5:1 comp.
i found one in the competition products catalog made by elgin for 169.95 with howards edm lifters. for the rest of the motor i am thinking fo...
I forgot to say that it will be a dual purpose car. drag and street. if that makes a differince.
I heard that they want to put it up in big lake. also someone has bought the rights to the name minnesota dragways. if i remember right they even...
who has used it or still useing it? and how do they run on the street. I am thinking of putting one in my 327 for my a sedan.
the car is going to see both the street and the strip. running about 425-450 hp at the crank, 29.5-10.5 slicks and leaving on the trans brake at...
i am leaning tward the 8 3/4 because they are cheaper and the 742 case has the biggest pinion: http://www.moparts.org/Tech/Archive/axle/1.html
I will be putting one or the other in my model a sedan. what are some of the pros and cons of each?
what would be the best in a car that is 50/50 strip and street? would wieght make a diffrence? i dont know if i should go with a spool or a posi.
thanks again for all the info.
thanks for all the input. now i have decied to use them for sure. even more so after hearing this 327 with a schneider cam...
were you still runing the 2 bolt mains or did you have 4bolt caps machined in?
8500 RPM sbc!! i need more details, thats awsome!
Separate names with a comma.
The Jalopy Journal
