The Jalopy Journal
squirrel, the box is tight to the frame, and this was not an issue with the old box. i am uploading a video and a few pics. and yes the steering...
Yeah i should have told that to the previous owner when he built it....
well the box is correct so my tie rods will need to be changed out so i can shorten them down som. I hope my parts guy is good.
after a small mishap with my Power steering gear box which is now gone forever http://www.jalopyjournal.com/forum/showthread.php?t=608990 I...
called the mfg. about the box, they said that the box might be off a tooth but told me how to determine that. so we will see later tonight. up...
Ebbsspeed. Thats a good though i hadnt thought about that. But since my pitman arm is straight back when the wheel is centered i would assume...
i understand centering the box and wheel when this is done the pitman arm is straight back, but does not line up with the tierod connection. it...
when the wheel is centered the pitman arm is pointing straight back. do the tie rods come in different lengths standard, or am i going to be...
i went out and looked this morning and it apperars that i couldnt adjust the tie rods any more. the passanger side is screwed almost all the way...
i had to replace my leaking 605 steering box on my 62' impala. i had wanted to switch to a 500 box but after finding my pump was leaking and the...
no such luck, everthings kinda vauge.
i have a power steering gear box labled gm 7819688. i am trying to replace it. the parts store says they have multipule versions of the saginaw...
is it possible to get them from a local parts shop? (napa) or a rebuilt? its hard to justify the $100 for rebuilt 600 vs $350-$400 for a new 500 box
The previous owner removed the leaky power assisted steering of the 62' impala and replaced it with a leaky 605 steering box. I have been told...
We are two hundred miles from home on vacation and the car has started blowing the fuse to the ac compressor. I think the clutch is about to go...
Is your wagon stock?
I have been on both ends. When i was in my early 20's i bought a 77 corvette with a factory 454 in it from a dealer.... Paid what i thought was...
update: well im not going to jinx it by saying problem solved, but after replacing the el-cheapo- flex fan with a 7 blade fan the same trip i...
i have that unit in my 53 and the vintage in dash in my 62. for what its worth after installing both. the vintage air unit is 1000 times better....
well here is alittle more info after my drive tonight. it starts out good warming up to 180-185 and hold this temp for a good 30 mins of...
so heres the current set up. stock fan and clutch w/ shroud and 3 core radiator 4speed no other options. before the a/c install it ran in the...
prior to the a/c install i was running 185-195deg on the freeway depending on the outside temps. sitting in traffic i ran 195-200 typically....
Okay heres a little update. She will lose the bike it was stolen. The visible vin had been modifed, they had to remove the tank to look at the...
how dificults is it to pull the starter on a sbc? my previous car was a pain. seems like you had to disasemble more than you would think to get...
when replacing the wiring to the starter tonight i managed to break the plastic cap on the back of the solenoid, so heres the question can you...
the vintage air instructions call for 1.8lbs of r134a or approx 28 oz. how do you fill accuratly when r134a only comes in 12 oz cans? can you...
i have a broken lower power steering bracket on a 62 impala ss. Will other years and style fit in place or do i need to find a year specific part?
it dossent appear to have leaved so it might be okay. any thoughts....
okay, so i tried a torch on it, no luck. and i dont have access to a welder so i took some measurements. the drain plug is the a 1/8" higher...
my transmission filler plug is completly round off and stuck. any tips on removing it? I have tried vice grips but no luck, ii just made the...
Separate names with a comma.
The Jalopy Journal
