The Jalopy Journal
I'm looking at the front universal joint from an Early Ford torque tube, and I need to pull it apart to do a job on it. Any-one know how to do...
What seems like yesterday - probably 2 yrs ago, there was a thread showcasing the comversion of a 32 4 door sedan to a 5 window coupe. I can't...
Has anyone fitted a 39 Banjo steering wheel onto a Model A column? I'm re-reading Hop Up #6 featuring Steve Beck's "A Bomb", and note that he...
Does anyone know if Vern Tardel's "Y" manifold and Thickstun Aircleaners have the same Carbie spacing - the centre to centre spacing of my repop...
I'm running a 37 Packard trans in my coupe, and it has no slip yolk on the output shaft of the gearbox, so I need to run a split driveshaft, with...
Not on Scott's 2005 thread, telling us he has posted a link to his 2005 pics. Come on guys - bring 'em on for all of us out-of-towners.
I'm doing an open tailshaft conversion on a 10 spline '36 rear end, and need the OD dimension and the relative position of the pin holes of a 6 to...
If my memory serves me correct, a Model A rear is 55" bolt face to bolt face, and a '35-36 is 60" wide, and a 41-48 is 61-62" wide, but what are a...
Hey guys, anyone know of where I could obtain a few parts for my coupe? I'm after a set of 46-48 rear radius rods, a Model A to 34 front...
These are still available from vintage Ford Dealers, but before I go and buy one, can some-one answer these Questions How long are they? do...
Just got a flyer from the local distributor of of the US product "Fitch Fuel Catalyst", and I was wondering if any-one has any...
I'm not fairing too well lately, so stay with me as I try to explain my situation. 2 1/2 years ago we built a house right after we had our...
Sorry, the Kiwi Hambers. I've heard that some-one in NZ has the Australasian distributorship for reproduction Steel 32 Ford Roadster bodies...
and posted pics on the HAMB, and I neglected to save the pics. They were for a SBC, and if my memory is correct the car was a 32 Ford. Can...
These coupler are used in early Ford torque tubes, to run a 6 spline pinion into a 10 spline torque tube driveshaft. Is the size of the 6...
I ask this because I'd like to ask him - or anyone else for that matter - if he still has the 6" offcuts form the top chop that was done on the...
Friends romans and countryman, I've been offered a couple of blue flame six cylinder Chevy blocks, and need to get them from the vendors place in...
I just heard on the radio that DLRA member John Lynch achieved 300 mph in his belly tank. Well done John. F for thoise that don't know John's...
I'm looking to write an article/tribute on this ex-coupe, now XXO/Gas Modified roadster #64, and I cannot find the article from an eighties...
I work in the Health Care Sector, probably as far away from the automotive scene as is possible, so I gather all my automotive information from...
Thanks. What I'd like is to see the side profile with several different chops - 2", 3", and 4". I'm trying to figure how much to chop it, and...
are in Drewfus holiday to Melbourne snaps PART 3. In this thread there is a full description of the coupe. Can anyone post a link to the...
I have a few pictures of the Icanno/Ganahl 12 port Jimmy powered Rail job from the 12 port news, including a repop of a 2 part history of the car,...
I went to a local reseller of The Rodders Journal (John's R & C for the skips out there) and saw the latest issue. I'm real keen to get it as...
Peddro just sms'd me that he now has them. The package must have been around the world 5 times as they were posted in july, and he just got them!!!!!
I've been trying to get back to check out Don Dillard's web site, but all that comes up is a generic Hypermart web page. Can anyone shed some...
I've got a set of 53-55 brakes, and a set of 63 brakes. Our local brake shop lists 64-70 replacement drums, and I was wondering if they are...
As seen on Don's hot rod Page?
I was deleting a site that I never visit from my favorites..... and I deleted the whole fuckin lot!!! Anyone know how to save a dumb clutz like...
I dunno if you saw thw post I wrote a while ago asking for a hand for a guy suffering from a melonoma, but there is to be a wroking bee to help...
Separate names with a comma.
The Jalopy Journal
