The Jalopy Journal
thanks guys, i got it. one more item off the list.
wiring the lights for my model A. i've got head lites (bright & dim), and tail lites. for turn signals i'm using a turn signal switch i got from...
trying to wire a vdo gas gauge. it has 5 terminals on the back. top 2 are for lighting, the bottom 3 are for the power (12v) the ground and the...
ok that how i set it up, but what does the proportioning valve do? and what do the residual valves do?
under the floor.
my A has disc brakes in front and drums on the rear. do i need a proportioning valve if my master cyl. has two reservoirs and two lines. one...
I'm a long time newby, messing around with my A for way too long, probably have less than 500 miles on it, but i enjoy making it better. should...
what should i use to make the interior trim panels of my A? 1/4" plywood seems to thick,
so all i need to do is add a tube with a loop higher than the tank and run the tube out the floor with a gas filter on the end to my unvented tank.
71 in spite of some of the less than brilliant things attempted
is there a thread on making an A pickup box? tried to do a search and couldn't find anything.
How long are the subrails (measuring from the hinge side of the cowl
Never again
went back to a watched thread about homemade steering columns, and the pics were gone. anyway to get them back?
so what size (width) tires will fit on these narrow rims. can't afford coker so will have to use tires bought locally.
I know it may be early, but anyone have any leads on camping for 2016?
Any one know when Hershey 2016 is?
checked the needle valve and replaced the float. put it back together and it still does the same thing. next step is the fuel pump, but I can't...
Wouldn't a plugged filter cut down on the gas? It looks like I'm getting too much
it ran fine for over a year with no regulator and the holly 390 cfm carb.
I've got a an 8ba with a Holly 4 barrel. All at once it started running rough. I think it's getting too much gas, if I unhook the electric fuel...
saw a new model a roadster pickup body on an auction site. built by a company i never heard of , anyone bought a new pickup on ebay? is it ok to...
i hope you didn't have to swipe that off your kids bike, but its a good idea and it looks cool with the hood :)
welcome, if you been lurking for a while you already know much about this forum. probably find most if not all the answers you're looking for....
I think you can get a new one from borgerson(sp).
me too.
am attempting to wire the rear lites on a model a. not using a wiring harness, just one circuit at a time. i've got the tail lites and stop...
do any of the alliance vendors sell borgerson (sp) steering boxes? thanks rer_239
Separate names with a comma.
The Jalopy Journal
