The Jalopy Journal
thanks will check into that.is this for sure the problem???
bump:D
well now i am going insane also.. bled the system when i cracked the bleeder screw just fluid came out no air. pedal seems the same as when i just...
here you go..pretty easy to make also:D
mid to late 60's chevy or gmc...
x2 real easy to do...
how much??
there's a vid on youtube how to bleed a slave cylinder its pretty cool.check it out:D
run early chevy truck arms you can find them cheap and get really low...
well finished my slave cylinder bracket today and installed everything. as soon as i step on the pedal it move really nice still need to bleed the...
i used a 70's caprice driveshaft in my old 49 sedan bolt in deal..:D
thanks.. will check into that
that car is killer..:)
i had a lockup th350 in my old 53 chevy . was great trans :D
ok found the hurst plate kit but doesnt come with a shifter body..
trans is fresh.but what i need to know is that i am looking for the type of shifter that bolts to the tail shaft on my trans tried looking but i...
anybody have the part number or know which application to ask for .need help getting a hurst shifter for a saginaw that mounts to the tail...
thanks for the reply...i used a 12 inch crescent when i had the trans at a angle{trans was angled down} and it worked i guess i got worried when i...
running a 4-speed
i had a mechanic friend tell me that trying to release the clutch bearingby hand in first gear is harder then doing it in a taller gear????
so when i install the slave cylinder it should have the force needed to move the clutch fork all the way???
just got ahold of the short one and used an adjustable pivot ball everything is back together.used an clutch a adjustable wrench on the fork end...
tried looking came up with 2 size throw out bearing that might work 1.580 or 1.525 anybody have some part numbers for these sizes if the long...
fork is installed correct and motor is a 350 with 4-speed saginaw 11inch clutch diaphfram style...
ok just installed my pressure plate diaphram style...bolted everything else together then slide trans in then problem number 1.throw out bearing...
welcome to the hamb..from anaheim also.....:cool:
cool thanks...
also what about throw out bearings i here there are 3 sizes.i will be running a diaphragm clutch wich one will i need????
still needs some work like a chop..but the rear is pretty low no blocks either.48 coupe:D
thanks this is the info i needed.:D:)
Separate names with a comma.
The Jalopy Journal
