The Jalopy Journal
Thanks for the info Rich. I will have to check to see if there is a sleeve on the shaft. I have searched everywhere looking to find a seal that...
Thanks Robert for your input. I wasn’t trying to complicate anything, only trying to finish what someone started decades ago. I’m sure it will all...
Everyone has been very helpful. Another quick question??? Can anyone identify this hub? I’m looking for the seal and grease cap and I haven’t had...
Thanks Rich. The yellow spring had to be stretched and walked on with the spring tool.
Y Yes it does line up with the opening.
Are you referring to the wheel bearings? I’m still trying to find a set of seals and grease dust covers that work with my hubs.
I will try and stretch it over. Grease shields?
Hello guy. Thanks to everyone for all the valuable information on these brakes. I believe I have everything close to being correct. I assembled...
This is an aluminum radiator set up for Ford flathead motors. This came off of a flathead engine run stand that I own. Make it fit whatever you...
1931 Chevrolet radiator. Was converted to work with small block Chevy. This radiator was removed because it was leaking. It has been sitting on...
That is the plan.
I have the fenders but they are in the loft. Someday I might decide to run them but no fenders for now. Thank you!!
I found a roll bar hoop that had some decent bends in it and the tubing size was the same as the ladder bar crossmember. I still have a little...
Does anyone know the measurements for the F2 anchor pins? I found the F1 style and they have a measurement. [ATTACH]
It would be nice if I could find a set.
I will check the classified section. Thank you
Thank you again for the info.
Thank you very much for your help and thanks to everyone else who helped or gave their opinion. This car is like a big puzzle that someone started...
Thanks Rich. I need to buy everything to make these brakes work. I have no hardware except for the brake shoe retaining pin. The brake shoes I...
Here is a picture of the F250 style brakes that I found here on the site.
Thank you Krylon32 for the information. I have a box a brake parts that came with the car. 12x2 inch brake shoes, brake shoe retaining hardware...
Thank you Jim.
Hello all, I have searched and haven’t found an answer. I have 13 inch Ford front brake backing plates with Buick drums. The machine work has...
Looks like I should add some additional tubing to strengthen the ladder bar crossmember.
Thank you for your feedback. I guess I will find out once I get it running down the road.
Fast forward to today. I got the frame back from the powder coated and started to reassemble the chassis. The motor is a 396 bored to a 402. 10.1...
Here are some pics of the 32 5 window I have been working on over the last few months. I got the car in Michigan and it was a surprisingly nice...
BTT. Willing to trade for a set of 16x4.5 early food wheels
btt. I will also trade for 4 16x4.5 early 40’s ford steel wheels.
Sold. Thank you
Separate names with a comma.
The Jalopy Journal
