The Jalopy Journal
Try these guys http://www.prestigewheel.com/
If you can rig up a weber carb idle sync tool you can set up the idle on all three carbs and just run them all three at the same time. Italian...
Weld the heads of the bolts. If not they will give you problems.
Cool car man and I'm glad your going to keep the original engine in her for a while. Is it a powerflite trans?
I would take any aluminum intake over an iron one. We replaced an iron manifold on a 64 390 4speed Galaxy with a POS Edelbrock streetmaster and...
If you need any help give me an e-mail tlc4260@yahoo.com . I'm an hour or so from Philly in NJ by Easton PA but have been working on cars from the...
Andalusia Speed Shop 2535 Street Rd Bensalem, PA 19020 215-639-0555
Why not have him post the parts on the HAMB
Yes it's pretty normal. I'd fill the box with Penrite steering box lube.
Look at carsinbarns.com hours of looking.
You could run some wires like on this 1928 Vauxhall
Just remember if you using good paint the supply bill can be $3500.
We painted a Lamborghini. Just some minor dent repair, prime, wet sand, paint, wet sand and buff - 35,000. Looks great and straight. 140 hours...
Remove the lines and make sure that there are no metal filing on the flair. Tighten the shit out of them
Rim size really won't make any difference. Tire hight will make them ride just a little smoother
Bias tires just don't ride as smooth and it's just the way they are. They will actually balance up better than radials because they are heavier....
In my experience it 9 times out of ten the radiator. Flush it or get it recored and it should fix it. Take the cap off with the t-stat open and...
Could you machine button heads in a lathe? Have you tried metric and multi standard?
Cool find man. That will be a cool build. Post some pix.
Cool man, that's awesome. Good luck.
Those flatheads get stuck so easy. It could be the cam shaft or a piston stuck in the bore. Pull the plugs, load the cylinders with marvel or...
Nice work. Love the engine color.
I would pull the shift rods off the trans and manually move the levers. If there good it's a shift lever problem. You may have a damaged shift...
Looking good. You do nice work. Good luck with the truck and keep posting pictures.
It's normal sometimes for a head gasket to weep. Don't use bars leak. It sucks! If it bothers you try a small amount of black pepper or replace...
Button head allen's or just use steel rivets. They're really easy to install with an air hammer set up
Long cross ram manifolds and a 4 speed. Looks like it's in really good shape.
If it a painless harness the wire them selves are labeled. Rear the tracers. They'll say heater, coil, etc. If not electrical marker stickers...
They usually just cause problems on street engines. Most people run to big of a carb or a single plane intake on a street motor. Most of the...
If your engine's intake manifold is to restrictive or a poor design a carb spacer can help. If your engine is making a lot of power and your...
Separate names with a comma.
The Jalopy Journal
