The Jalopy Journal
Thanks fellow rodders fort the info, the tb is different on the upper and is a press in and I hope that when unsalted roads are back I will drive...
:confused:Hey Folks, I need to replace the joints on my 63 Thunder Chicken and the price for the uppers is out of site, is there a way to modify...
Jeff and others,, I have the timing cover off and the fuel pump looks OK and the timing cover is OK, putting a magnet into the pan brings up some...
What problems have you had with this engine, I just did a quick overhaul and did not true the bores nor change pistons as they did mic out with...
Got it fixed, I had to take the rockerarms apart and flush em, never gave it a second though as it did not rattle before I took it apart, darn...
1. yes 2. light and ear, ear works the best 3. It did have the draft tube but am changing over to pcv 4. Had to replace two exh valves 5. This is...
the heads had new seats put in and a couple of exh valves I also had the heads shaved five thou to get them flat along with new lifters. Would...
Removed the carb and the spacer had a big gap on the backside where the egr? would be as the gasket did not cover the bottom of the spacer,...
The heads were milled to five thousandths to level them out which should not have had an effect on the valves, I at first thought it was a valve...
Hey guy and gals maybe I have lost the touch as I cannot get this engine to run:confused:, Heads rebuilt with hardened seats, new valve guides and...
Yup use the network to find a reliable shop, as an owner operator of several trucks it will not be worth the transport vs the repair in Vegas. If...
One way I do it is to have the buyer and myself stand in front of the car on each side of the plate and take a picture.
WOW, like super toot you got it right
Thanks or is it tanks=8')
Grease monkey from day one cut my teeth in a full service gas station yup a true Lug Nut held the record at Minnesota dragways in FSX and I been...
Separate names with a comma.
The Jalopy Journal
