The Jalopy Journal
Double pulleys on the water pumps indicate a likely truck engine. They may be a later addition.
2 X XL please if you ship to Australia.
Holley 94 will work fine. Just remember to regulate the input pressure to about 2.5 psi.
For evidence of the strength of Ford welded spoke wheels see the following from the 1934 Chicago World Fair. The text is from the original...
450/475 X 21 were original Model A.
Looks like you are starting from Olds Alberta.
Any pictures of the Model A?
Front hood ornament is definitely Buick.
I believe Model A's were made as late as March 1932. Some used the 18" wheels also used on the 32 models.
We have all had the problem of the brain not working after a long and frustrating day. When looking at this type of problem I try and make a...
The new Stewart Warner type solenoid pumps are made in Mexico and are not worth buying, I've had two fail. Carter make a good rotary pump.
If it works or is repairable $100 is a good deal. The reason it is on a long cable was so you could use the light at night when you had to change...
Original fuel tank is 14 gauge.
"`Yakety Sax' will be my trademark," Randolph said in a 1990 interview with The Associated Press. "I'll hang my hat on it. It's kept me alive....
Powerwaggon I'm surprised the white cable ties are strong enough to hold your shocks in place while driving down the road.
The company that sends these out simply forgot to send the whole #35 shipment to Australia so they bundled it up with # 36, which arrived here...
Better than a book is this online link for all types of calculations. http://www.csgnetwork.com/converters.html
Does the attached look like it might make a trad hot rod. It is a Ford Model Y, designed and made in England for release in 1932. Edsel Ford saw...
I am planning to add some relays to my 6 volt 1940 Coupe. All the standard Bosch types are inscribed 12Volt. Are these things really voltage...
Put a temporary gauge in the line and start the engine; it must be running to set pressure correctly.
I have a friend who built one, without any plans. What he did was locate someone that owned one and approached him for permission to photograph...
http://www.flatheadted.com/index.php This link will take you to a vendor who sells an excellent floater kit for mechanical Ford car brakes. If...
Local Wildlife. "Not now kid."
To me the face of the head looks OK, I wouldn't resurface is if it were one of mine. What is worth checking on these blocks while it is at the...
The gauge actually looks like a leak-down tester. Rotate the engine until the piston of the cylinder the gauge is attached to has both valves...
Agree entirely with this, it is mainly the weight of the fuel tank that does this. I have seen it in original (unrodded) deuces that have never...
I'm using the one piece aluminum front seal from Mac's on my B motor, doesn't leak a drop. Part A6700M. Check your front pulley for a groove worn...
Just a bit of advise from someone who has been there; the flat dial-type fuel pressure regulator you are using has a bad reputation among banger...
If you want to see what the actual early sites looked like click the link below. Takes you to the Wayback Machine, this enables you to recover old...
Regarding the crocs. If you get a chance to eat a piece you should try it. Tail is best, tastes like chicken.
Separate names with a comma.
The Jalopy Journal
