The Jalopy Journal
Since I don't have an original relay, and they don't work with HEI without adding a second relay, I used a Bosch type relay to control the OD I...
As far as the stalling problem goes, make sure the accelerator pumps are working correctly on all three carbs. Hesitation at top end could be a...
I edited my post. Maybe it makes sense now.
The govenor keeps the OD from engaging below 30 mph or so. If the OD is engaged in first when taking off then the govenor was been bypassed or is...
There should be a small terminal on the starter that is for feeding 12v to the positive terminal on the coil to bypass the ballast resistor while...
Looks like Sunday will be a good day there. Rain all day tomorrow (Friday) 20% chance Saturday, sunny on Sunday.
Good day today. Swap meet sold out all it's spaces. Sold a lot and found some good deals too.
Not too busy on Thursday. Lots coming in and setting up that day. Friday is pretty busy and Saturday is Rock and Roll!
I'll be there. I've got 6 spaces. Headquarters are Row S space #125. Forecast calls for sunny and high 60's to mid 70's
I've been seeing that on DFW Craigslist for a while. Glad to see that it found a good home.
Looks like the trophy is a Trailer Queen!
My '62 Impala had the dash lights fused with the brake lights. I suspect so you would have a good indicator that you had an important fuse blown....
Ever since I bought my first Hotrod mag in about 1960. Started helping Dad and Grandpa work on their stuff about then.
A few years ago I bought a '63 Riviera from an elderly lady. The car was her late husbands and had been setting out in the weeds for several...
It's a 401
I thought you said "Grasser" My Bad [IMG]
One of my favorite shows. Real stuff instead of the reality BS we see nowadays.
The 283's I have run all like the 2400-2500 range my suggestion was going to be try an overdrive but I see you came with that on your own. Might...
Cheap Chinese flexplate might be too big.
No clue here but if your you bought your truck turn key from a reputable shop, I would hire an reputable mechanic to diagnose it and find out if...
The un-official HAMB Gasser rulebook http://www.jalopyjournal.com/forum/threads/gasser-must-haves-and-cant-haves.822149/
55 up Chevy manual trans to pre 55 Chevy passenger bell housing?
That's Bad Ass. If the mods delete it, tell me where you go from here so I can go hang out with you!
I'm thinking that that T in your pvc system might be causing a problem. The PCV valve needs to be hooked to a manifold vacuum source which could...
My 409 powered 38 chevy coupe. [IMG]
Edelbrock Single 2 barrel [IMG]
If it would slide back at least a quarter inch I'd be tempted to spray some carb cleaner in the gap to remove the oil then smear some silicone...
I like using the newer permanent magnet gear reduction starters with the staggered bolt pattern. Come on early 90's big block trucks. Have one on...
Jeese, you got all kinds or room! you can still walk between the cars without turning sideways and shuffling! Whiner!
Separate names with a comma.
The Jalopy Journal
